PC Polycarbonate Pellets الحبيبات
الحبيباتPellet · FGF / FDM · Industrial pellet 3D printer

PC Polycarbonate Pellets

An engineering grade with standout impact strength, heat resistance above 130℃ and translucency, for high-temperature duty, load-bearing structures and electrical insulation in large parts.

  • BL10-C supported
  • Tensile 55–70 MPa
  • Heat 130–145 ℃
  • High impact
Extrusion temp.
260–310 ℃
درجة حرارة السرير الساخن
90–110 ℃

المزايا

Standout impact strength

Around 34.8 kJ/m² keeps protective structures from brittle failure on impact.

Heat resistant and stable

Heat deflection of 117–145℃ holds structural integrity in hot service.

Translucent and insulating

Natural translucency plus good electrical insulation suits electrical and optical parts.

Drying process included

Ahead of printing, 80℃ for 8h in a convection dryer reduces bubbles and silver streaks.

التطبيقات

  • High-temperature parts
  • Electrical & insulation
  • Translucent structures
  • السيارات والنقل
  • Load-bearing tooling
  • Large protective guards

فحص المصنع

Bulk density 0.63–0.66 g/cm³, moisture and MFR checked per batch; drying card plus BL10-C sample verification included.

الخصائص الفيزيائية

Density
1.20 g/cm³ASTM D792
Bulk density
0.63–0.66 g/cm³ISO 60
Tensile strength
55–70 MPaASTM D638
Flexural strength
80–108 MPaASTM D790
Flexural modulus
2.0–2.5 GPaASTM D790
Impact strength
≈ 34.8 kJ/m²ISO 179
Heat deflection temp.
117–145 ℃ISO 75(0.45MPa)
Melt flow rate
15–32 g/10minASTM D1238(300℃/1.2kg)

معلمات العملية الموصى بها

Extrusion temp.
260–310 ℃
درجة حرارة السرير الساخن
90–110 ℃
Pre-print drying
80 ℃ / 8 h
Environment
Heated chamber

المعدات المتوافقة

BOLIN BL10-C direct pellet extrusion: officially supported; a heated chamber plus 60–120℃ bed handles high-temperature forming. PC absorbs moisture, so dry at 80℃ for 8h first. Comparable FGF systems need nozzles stable to 280–310℃ and a fully enclosed chamber.

القيم نتائج اختبار نموذجية، ويتفاوت الأداء الفعلي حسب الجهاز والتركيبة والعملية والبيئة.

Custom colors available

طرازات ذات صلة

قائمة الحبيبات →
ABS Engineering Pellets الحبيبات

ABS Engineering Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Tough and impact resistant
  • Lower cost on large parts
  • Officially supported by BL10-C
Density
1.04 g/cm³
Tensile strength
35–45 MPa
Flexural strength
60–70 MPa
عرض التفاصيلالحبيبات
PP Polypropylene Pellets الحبيبات

PP Polypropylene Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Light with low density
  • Resists acid, alkali and solvents
  • Almost no water absorption
Density
0.90 g/cm³
Melting temperature
160–170 ℃
Tensile strength
30–35 MPa
عرض التفاصيلالحبيبات
PETG Copolyester Pellets الحبيبات

PETG Copolyester Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Strong layer bonding
  • Low warpage, easy forming
  • Clear or food-grade options
Density
1.27 g/cm³
Tensile strength
45–55 MPa
Flexural strength
65–75 MPa
عرض التفاصيلالحبيبات

استفسر عن العينات والتوريد بالكميات

أخبرنا بحجم الجزء والمادة والكمية، وسنطابق الماكينة ودرجة الحبيبات ومعلمات اللولب.

اطلب حلاً

أخبرنا بما تحتاج إلى تشكيله

يُستخدم للرد على هذا الاستفسار فقط.

Boolean 3D

BOLIN 3D · SINCE 2008

Research and manufacturing of industrial 3D printing equipment, providing consumables and custom printing services for aerospace, medical and dental, automotive, cultural creativity, and precision manufacturing industries.

Manufacturer Name

Building 1, Dengsheng Smart Emergency Equipment Park, west side of the road, 260 meters south of the intersection of Qingliangxi Road and Zhenxing Road, Liangyuan District, Shangqiu City, Henan Province

Monday to Saturday 08:30–18:00, 24/7 technical support

Language and Region

© 2026 Henan Bolin 3D Printing Co., Ltd. · All rights reserved

Request a solution
WhatsAppRequest a solution