
ABS Engineering Pellets
Pellet · FGF / FDM · Industrial pellet 3D printer
- Tough and impact resistant
- Lower cost on large parts
- Officially supported by BL10-C
- Density
- 1.04 g/cm³
- Tensile strength
- 35–45 MPa
- Flexural strength
- 60–70 MPa

10–40% glass or carbon fiber in ABS, PP, PC or PA bases raises stiffness, strength and dimensional stability for large load-bearing parts and low-warpage molds.
Much higher stiffness
Carbon fiber lifts stiffness 30–60%, keeping large thin walls from sagging.
Low warpage and stable size
Fiber restrains shrinkage, so meter-scale parts hold dimensions with less rework.
Pellet form is more flexible
Compounds go straight into pellet extrusion, avoiding filamentizing issues at high loadings.
Heat and fatigue resistant
Glass fiber raises strength and heat deflection 20–50% for long-term loading.
Werksprüfung
Fiber content and dispersion, pellet size and MFR checked per batch; base resin and filler ratio can be tailored with sample verification.
Geeignete Anlagen
BOLIN BL10-C direct pellet extrusion: screw extrusion suits filled compounds that would wear out filament feeders. Fiber wears nozzles, so use hardened steel nozzles with a larger diameter.
Die Werte dieser Serie sind typische Prüfwerte; die tatsächliche Leistung hängt von Maschine, Rezeptur, Prozess und Umgebung ab.
Custom color and formulation

Pellet · FGF / FDM · Industrial pellet 3D printer

Pellet · FGF / FDM · Industrial pellet 3D printer

Pellet · FGF / FDM · Industrial pellet 3D printer
Nennen Sie Teilegröße, Material und Stückzahl – wir passen Maschine, Granulat und Schneckenparameter an.