PP Polypropylene Pellets Granulado
GranuladoPellet · FGF / FDM · Industrial pellet 3D printer

PP Polypropylene Pellets

A light material at 0.90 g/cm³ that resists acids, alkalis and fatigue and absorbs almost no water, suited to chemical containers, corrosion-resistant liners and lightweight large structures.

  • BL10-C supported
  • Density 0.90 g/cm³
  • Elongation >200%
  • Water absorption <0.01%
Extrusion temp.
220–260 ℃
Temperatura de la cama caliente
80–100 ℃

Ventajas

Lighter engineering plastic

At 0.90 g/cm³, large parts shed weight and are easier to move and install.

Acid, alkali and solvent resistant

Stable against acids, alkalis, alcohols and most solvents, fitting chemical and lab settings.

Fatigue resistant and ductile

Elongation above 200% keeps living hinges from cracking under repeated folding.

Almost no water uptake

Water absorption below 0.01% removes long drying steps in storage and production.

Aplicaciones

  • Chemical tanks & liners
  • Lab & medical
  • Lightweight structures
  • Logistics containers
  • Living hinges
  • Food-contact parts

Control de fábrica

Uniform pellets, consistent batch MFR and controlled condensation; foil moisture-barrier packing with a BL10-C process card.

Propiedades físicas

Density
0.90 g/cm³ASTM D792
Melting temperature
160–170 ℃DSC
Tensile strength
30–35 MPaASTM D638
Tensile modulus
1200–1500 MPaASTM D638
Flexural modulus
1200–1600 MPaASTM D790
Elongation at break
> 200%ASTM D638
Heat deflection temp.
95–105 ℃ISO 75(0.45MPa)
Water absorption
< 0.01%ASTM D570

Parámetros de proceso recomendados

Extrusion temp.
220–260 ℃
Temperatura de la cama caliente
80–100 ℃
Velocidad de impresión
20–60 mm/s
Diámetro de la boquilla
≥1.0 mm

Equipos compatibles

BOLIN BL10-C direct pellet extrusion: officially supported; screw extrusion avoids soft PP bending in long feed paths. Use ≥1.0mm nozzles and 0.5–2.0mm layers. Comparable FGF systems need a PP-specific bed surface and 80–100℃ bed.

Los valores son resultados de ensayo típicos; el rendimiento real varía según la máquina, la formulación, el proceso y el entorno.

Custom colors available

Modelos relacionados

Lista de granulados →
ABS Engineering Pellets Granulado

ABS Engineering Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Tough and impact resistant
  • Lower cost on large parts
  • Officially supported by BL10-C
Density
1.04 g/cm³
Tensile strength
35–45 MPa
Flexural strength
60–70 MPa
Ver detallesGranulado
PC Polycarbonate Pellets Granulado

PC Polycarbonate Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • High impact resistance
  • Heat resistant, dimensionally stable
  • Translucent and insulating
Density
1.20 g/cm³
Bulk density
0.63–0.66 g/cm³
Tensile strength
55–70 MPa
Ver detallesGranulado
PETG Copolyester Pellets Granulado

PETG Copolyester Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Strong layer bonding
  • Low warpage, easy forming
  • Clear or food-grade options
Density
1.27 g/cm³
Tensile strength
45–55 MPa
Flexural strength
65–75 MPa
Ver detallesGranulado

Consultar muestras y suministro por volumen

Indique el tamaño de pieza, material y producción; ajustamos máquina, grado de granulado y parámetros de husillo.

Solicitar propuesta

Indíquenos qué necesita fabricar

Solo se usa para responder a esta consulta.

BOLIN 3D

BOLIN 3D · SINCE 2008

Desarrollo y fabricación de equipos industriales de impresión 3D; ofrecemos consumibles y servicios de impresión personalizada, atendiendo a los sectores aeroespacial, médico-dental, automoción, creatividad cultural y fabricación de precisión.

Dirección de fábrica

Carretera Qingliangsi Avenue, intersección con Zhenxing Road, 260 metros al sur, lado oeste de la carretera, Nave nº 1, Parque Industrial de Equipos de Emergencia Inteligente Dingxing, Distrito de Liangyuan, Ciudad de Shangqiu, Provincia de Henan

Lunes a sábado, 08:30–18:00; soporte técnico 24/7

Idioma y región

© 2026 Henan Bolin 3D Printing Co., Ltd. · Todos los derechos reservados

Solicitar propuesta
WhatsAppSolicitar propuesta