TPU Flexible Pellets Pelet
PeletPellet · FGF / FDM · Industrial pellet 3D printer

TPU Flexible Pellets

An elastomer in pellet form for large flexible parts — seals, cushions, rollers and soft jaws — printed in one piece without seams.

  • Shore 80A–98A
  • Elongation 300–700%
  • Abrasion resistant
  • One-piece forming
Extrusion temp.
210–235 ℃
Suhu hot bed
40–60 ℃

Keunggulan

High elasticity and rebound

Elongation of 300–700% survives repeated folding and compression without permanent set.

Abrasion and impact resistant

Oil and chemical resistance plus vibration damping suit constant wear and impact.

Large parts in one piece

Meter-scale flexible parts skip joining, keeping seals and structure intact.

Selectable hardness

Shore 80A–98A covers both soft-touch and load-bearing needs.

App

  • Large seals
  • Cushioning & damping
  • Tires & rollers
  • Soft jaws
  • Sports & protection
  • Industrial bumpers

Inspeksi pabrik

Hardness rechecked per batch by grade, with pellet size and MFR verification; moisture-barrier packing keeps soft pellets from clumping.

Sifat fisik

Shore hardness
80A–98AASTM D2240(可选牌号)
Density
1.18–1.22 g/cm³ASTM D792
Tensile strength
15–35 MPaASTM D638
Elongation at break
300–700%ASTM D638
Abrasion resistance
ExcellentTaber 磨耗
Long-term heat
60–80 ℃continuous
Oil resistance
Good耐油脂与多数溶剂
Pellet size
2–3 mm可选 2–5mm

Parameter proses yang disarankan

Extrusion temp.
210–235 ℃
Suhu hot bed
40–60 ℃
Print Speed
20–40 mm/s
Diameter Nosel
≥1.0 mm

Peralatan kompatibel

BOLIN BL10-C direct pellet extrusion: the short screw path keeps soft material from buckling in long feeds; run cool and slow, usually without retraction. Comparable FGF systems need short feed paths and hopper drying to avoid clumping.

Nilai ini hasil uji tipikal; performa aktual bergantung pada mesin, formula, proses, dan lingkungan.

Custom colors available

Model terkait

Daftar pelet →
ABS Engineering Pellets Pelet

ABS Engineering Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Tough and impact resistant
  • Lower cost on large parts
  • Officially supported by BL10-C
Density
1.04 g/cm³
Tensile strength
35–45 MPa
Flexural strength
60–70 MPa
PP Polypropylene Pellets Pelet

PP Polypropylene Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Light with low density
  • Resists acid, alkali and solvents
  • Almost no water absorption
Density
0.90 g/cm³
Melting temperature
160–170 ℃
Tensile strength
30–35 MPa
PC Polycarbonate Pellets Pelet

PC Polycarbonate Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • High impact resistance
  • Heat resistant, dimensionally stable
  • Translucent and insulating
Density
1.20 g/cm³
Bulk density
0.63–0.66 g/cm³
Tensile strength
55–70 MPa

Tanyakan sampel dan pasokan massal

Beri tahu ukuran bagian, material, dan kapasitas; kami mencocokkan mesin, grade pelet, dan parameter sekrup.

Request a solution

Tell us what you need to print

Only used to respond to this request.

BOLIN 3D

BOLIN 3D · SINCE 2008

R&D and manufacturing of industrial 3D printing equipment; providing materials and custom printing services for aerospace, medical & dental, automotive, cultural creative, and precision manufacturing sectors.

Factory address

260 meters south of the intersection of Qingliangsi Road and Zhenxing Road, west side of the road, Factory Building No. 1, Dingxing Smart Emergency Equipment Industrial Park, Shangqiu City, Henan Province

Mon–Sat 08:30–18:00, technical support 7×24 hours

Language and region

© 2026 Henan Bolin 3D Printing Co., Ltd. · Copyright reserved

Request a solution
WhatsAppRequest solution