
PP Polypropylene Pellets
Pellet · FGF / FDM · Industrial pellet 3D printer
- Light with low density
- Resists acid, alkali and solvents
- Almost no water absorption
- Density
- 0.90 g/cm³
- Melting temperature
- 160–170 ℃
- Tensile strength
- 30–35 MPa

A classic engineering plastic with toughness, impact strength and steam-polishable surfaces; pellet form skips the filamentizing step for large industrial prototypes, tooling and display structures.
Tough and impact resistant
Resists brittle failure under load, suited to jigs handled and assembled frequently.
Easy post-processing
Sanding, drilling and acetone vapor polishing bring large parts to a smooth finish.
Lower cost on large parts
Direct pellet feed removes filamentizing cost, cutting material spend on meter-scale parts.
Heated chamber limits warpage
With the BL10-C heated chamber and a 60–120℃ bed, large parts form more reliably.
工場検査
Uniform 2–3mm pellets, bulk density and MFR checked per batch; sample parts printed on BL10-C before shipping.
対応装置
BOLIN BL10-C direct pellet extrusion: 900×900×900mm build, screw extrusion, about 7–10kg per 24h, 0.8 / 1.2 / 1.5mm nozzles. Comparable FGF / FPF screw systems accept 2–5mm pellets; a heated chamber is recommended to limit warpage.
本シリーズの数値は代表的な試験値であり、実際の性能は装置・配合・プロセス・環境により異なります。
Custom colors available

Pellet · FGF / FDM · Industrial pellet 3D printer

Pellet · FGF / FDM · Industrial pellet 3D printer

Pellet · FGF / FDM · Industrial pellet 3D printer
部品サイズ・材料・生産量をお知らせください。機種・ペレット銘柄・スクリュー条件をご提案します。