PC Polycarbonate Pellets គ្រាប់វត្ថុធាតុ
គ្រាប់វត្ថុធាតុPellet · FGF / FDM · Industrial pellet 3D printer

PC Polycarbonate Pellets

An engineering grade with standout impact strength, heat resistance above 130℃ and translucency, for high-temperature duty, load-bearing structures and electrical insulation in large parts.

  • BL10-C supported
  • Tensile 55–70 MPa
  • Heat 130–145 ℃
  • High impact
Extrusion temp.
260–310 ℃
សីតុណ្ហភាពគ្រែកម្តៅ
90–110 ℃

ចំណុចលេចធ្លោ

Standout impact strength

Around 34.8 kJ/m² keeps protective structures from brittle failure on impact.

Heat resistant and stable

Heat deflection of 117–145℃ holds structural integrity in hot service.

Translucent and insulating

Natural translucency plus good electrical insulation suits electrical and optical parts.

Drying process included

Ahead of printing, 80℃ for 8h in a convection dryer reduces bubbles and silver streaks.

ការប្រើប្រាស់

  • High-temperature parts
  • Electrical & insulation
  • Translucent structures
  • យានជំនិះ និងដឹកជញ្ជូន
  • Load-bearing tooling
  • Large protective guards

ការត្រួតពិនិត្យនៅរោងចក្រ

Bulk density 0.63–0.66 g/cm³, moisture and MFR checked per batch; drying card plus BL10-C sample verification included.

លក្ខណៈសម្បត្តិរូបី

Density
1.20 g/cm³ASTM D792
Bulk density
0.63–0.66 g/cm³ISO 60
Tensile strength
55–70 MPaASTM D638
Flexural strength
80–108 MPaASTM D790
Flexural modulus
2.0–2.5 GPaASTM D790
Impact strength
≈ 34.8 kJ/m²ISO 179
Heat deflection temp.
117–145 ℃ISO 75(0.45MPa)
Melt flow rate
15–32 g/10minASTM D1238(300℃/1.2kg)

ប៉ារ៉ាម៉ែត្រដំណើរការដែលណែនាំ

Extrusion temp.
260–310 ℃
សីតុណ្ហភាពគ្រែកម្តៅ
90–110 ℃
Pre-print drying
80 ℃ / 8 h
Environment
Heated chamber

ឧបករណ៍ដែលគាំទ្រ

BOLIN BL10-C direct pellet extrusion: officially supported; a heated chamber plus 60–120℃ bed handles high-temperature forming. PC absorbs moisture, so dry at 80℃ for 8h first. Comparable FGF systems need nozzles stable to 280–310℃ and a fully enclosed chamber.

តម្លៃទាំងនេះជាលទ្ធផលធ្វើតេស្តធម្មតា ដំណើរការពិតអាស្រ័យលើម៉ាស៊ីន រូបមន្ត ដំណើរការ និងបរិស្ថាន។

Custom colors available

ម៉ូដែលពាក់ព័ន្ធ

បញ្ជីគ្រាប់ →
ABS Engineering Pellets គ្រាប់វត្ថុធាតុ

ABS Engineering Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Tough and impact resistant
  • Lower cost on large parts
  • Officially supported by BL10-C
Density
1.04 g/cm³
Tensile strength
35–45 MPa
Flexural strength
60–70 MPa
មើលលម្អិតគ្រាប់វត្ថុធាតុ
PP Polypropylene Pellets គ្រាប់វត្ថុធាតុ

PP Polypropylene Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Light with low density
  • Resists acid, alkali and solvents
  • Almost no water absorption
Density
0.90 g/cm³
Melting temperature
160–170 ℃
Tensile strength
30–35 MPa
មើលលម្អិតគ្រាប់វត្ថុធាតុ
PETG Copolyester Pellets គ្រាប់វត្ថុធាតុ

PETG Copolyester Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Strong layer bonding
  • Low warpage, easy forming
  • Clear or food-grade options
Density
1.27 g/cm³
Tensile strength
45–55 MPa
Flexural strength
65–75 MPa
មើលលម្អិតគ្រាប់វត្ថុធាតុ

សាកសួរអំពីគំរូ និងការផ្គត់ផ្គង់ច្រើន

សូមប្រាប់ទំហំបំណែក វត្ថុធាតុ និងចំណុះផលិត យើងនឹងផ្គូផ្គងម៉ាស៊ីន កម្រិតគ្រាប់ និងប៉ារ៉ាម៉ែត្រខ្យង។

ស្នើដំណោះស្រាយ

ប្រាប់យើងពីអ្វីដែលអ្នកត្រូវការបង្កើត

ប្រើសម្រាប់ឆ្លើយតបសំណើនេះប៉ុណ្ណោះ។

BOLIN 3D

BOLIN 3D · SINCE 2008

ការស្រាវជ្រាវ និងផលិតឧបករណ៍បោះពុម្ព 3D កម្រិតឧស្សាហកម្ម ផ្តល់ជូនសម្ភារៈ និងសេវាកម្មបោះពុម្ពតាមតម្រូវការ គ្របដណ្តប់វិស័យអាកាសចរណ៍ និងអវកាស វេជ្ជសាស្ត្រ និងធ្មេញ រថយន្ត វប្បធម៌ និងច្នៃប្រឌិត និងការផលិតច្បាស់លាស់។

អាសយដ្ឋានរោងចក្រ

ផ្ទះរោងចក្រលេខ 1, Dingxing Intelligent Emergency Equipment Industrial Park, ផ្លូវខាងលិច 260 ម៉ែត្រពីចំណុចប្រសព្វរវាងផ្លូវ Qingliangsi Avenue និង Zhenxing Road, ស្រុក Liangyuan, ក្រុង Shangqiu, ខេត្ត Henan

ច័ន្ទ ដល់ សៅរ៍ ម៉ោង 08:30–18:00, គាំទ្របច្ចេកទេស 24/7

ភាសា និងតំបន់

© 2026 ក្រុមហ៊ុន Henan Bolin 3D Printing Co., Ltd. · រក្សាសិទ្ធិទាំងអស់

ស្នើដំណោះស្រាយ
WhatsAppស្នើដំណោះស្រាយ