TPU Flexible Pellets 펠릿 소재
펠릿 소재Pellet · FGF / FDM · Industrial pellet 3D printer

TPU Flexible Pellets

An elastomer in pellet form for large flexible parts — seals, cushions, rollers and soft jaws — printed in one piece without seams.

  • Shore 80A–98A
  • Elongation 300–700%
  • Abrasion resistant
  • One-piece forming
Extrusion temp.
210–235 ℃
히트베드 온도
40–60 ℃

제품 특징

High elasticity and rebound

Elongation of 300–700% survives repeated folding and compression without permanent set.

Abrasion and impact resistant

Oil and chemical resistance plus vibration damping suit constant wear and impact.

Large parts in one piece

Meter-scale flexible parts skip joining, keeping seals and structure intact.

Selectable hardness

Shore 80A–98A covers both soft-touch and load-bearing needs.

적용 분야

  • Large seals
  • Cushioning & damping
  • Tires & rollers
  • Soft jaws
  • Sports & protection
  • Industrial bumpers

공장 검사

Hardness rechecked per batch by grade, with pellet size and MFR verification; moisture-barrier packing keeps soft pellets from clumping.

물성

Shore hardness
80A–98AASTM D2240(可选牌号)
Density
1.18–1.22 g/cm³ASTM D792
Tensile strength
15–35 MPaASTM D638
Elongation at break
300–700%ASTM D638
Abrasion resistance
ExcellentTaber 磨耗
Long-term heat
60–80 ℃continuous
Oil resistance
Good耐油脂与多数溶剂
Pellet size
2–3 mm可选 2–5mm

권장 공정 파라미터

Extrusion temp.
210–235 ℃
히트베드 온도
40–60 ℃
프린팅 속도
20–40 mm/s
노즐 직경
≥1.0 mm

호환 장비

BOLIN BL10-C direct pellet extrusion: the short screw path keeps soft material from buckling in long feeds; run cool and slow, usually without retraction. Comparable FGF systems need short feed paths and hopper drying to avoid clumping.

이 시리즈의 수치는 대표 시험값이며 실제 성능은 장비, 배합, 공정, 환경에 따라 달라집니다.

Custom colors available

관련 모델

펠릿 목록 →
ABS Engineering Pellets 펠릿 소재

ABS Engineering Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Tough and impact resistant
  • Lower cost on large parts
  • Officially supported by BL10-C
Density
1.04 g/cm³
Tensile strength
35–45 MPa
Flexural strength
60–70 MPa
상세 보기펠릿 소재
PP Polypropylene Pellets 펠릿 소재

PP Polypropylene Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Light with low density
  • Resists acid, alkali and solvents
  • Almost no water absorption
Density
0.90 g/cm³
Melting temperature
160–170 ℃
Tensile strength
30–35 MPa
상세 보기펠릿 소재
PC Polycarbonate Pellets 펠릿 소재

PC Polycarbonate Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • High impact resistance
  • Heat resistant, dimensionally stable
  • Translucent and insulating
Density
1.20 g/cm³
Bulk density
0.63–0.66 g/cm³
Tensile strength
55–70 MPa
상세 보기펠릿 소재

이 펠릿의 샘플과 대량 공급 상담

부품 크기, 재료, 생산량을 알려주시면 기종, 펠릿 등급, 스크류 조건을 제안해 드립니다.

선정안 요청

조형 필요 사항 알려주기

문의 응대 목적으로만 사용됩니다.

BOLIN 3D

BOLIN 3D · SINCE 2008

Research, development, and manufacturing of industrial 3D printing equipment; offering materials and custom printing services. Serving aerospace, medical/dental, automotive, cultural creation, and precision manufacturing sectors.

Factory Address

South of the intersection of Qingliangsi Avenue and Jinxiang Road, Liangyuan District, Shangqiu City, Henan Province, Dingxing Smart Emergency Equipment Industrial Park, Building 1, 260 meters west.

Mon–Sat 08:30–18:00, 24/7 technical support

Language & Region

© 2026 Henan Borin 3D Printing Co., Ltd. · All rights reserved.

Nomination Request