PC Polycarbonate Pellets ເມັດພລາສຕິກ
ເມັດພລາສຕິກPellet · FGF / FDM · Industrial pellet 3D printer

PC Polycarbonate Pellets

An engineering grade with standout impact strength, heat resistance above 130℃ and translucency, for high-temperature duty, load-bearing structures and electrical insulation in large parts.

  • BL10-C supported
  • Tensile 55–70 MPa
  • Heat 130–145 ℃
  • High impact
Extrusion temp.
260–310 ℃
ອຸນຫະພູມແຜ່ນຮ້ອນ
90–110 ℃

ຈຸດເດັ່ນ

Standout impact strength

Around 34.8 kJ/m² keeps protective structures from brittle failure on impact.

Heat resistant and stable

Heat deflection of 117–145℃ holds structural integrity in hot service.

Translucent and insulating

Natural translucency plus good electrical insulation suits electrical and optical parts.

Drying process included

Ahead of printing, 80℃ for 8h in a convection dryer reduces bubbles and silver streaks.

ການນຳໃຊ້

  • High-temperature parts
  • Electrical & insulation
  • Translucent structures
  • ຍານພາຫະນະ ແລະ ການຂົນສົ່ງ
  • Load-bearing tooling
  • Large protective guards

ການກວດກາທີ່ໂຮງງານ

Bulk density 0.63–0.66 g/cm³, moisture and MFR checked per batch; drying card plus BL10-C sample verification included.

ຄຸນສົມບັດທາງກາຍະພາບ

Density
1.20 g/cm³ASTM D792
Bulk density
0.63–0.66 g/cm³ISO 60
Tensile strength
55–70 MPaASTM D638
Flexural strength
80–108 MPaASTM D790
Flexural modulus
2.0–2.5 GPaASTM D790
Impact strength
≈ 34.8 kJ/m²ISO 179
Heat deflection temp.
117–145 ℃ISO 75(0.45MPa)
Melt flow rate
15–32 g/10minASTM D1238(300℃/1.2kg)

ພາຣາມິເຕີຂະບວນການທີ່ແນະນຳ

Extrusion temp.
260–310 ℃
ອຸນຫະພູມແຜ່ນຮ້ອນ
90–110 ℃
Pre-print drying
80 ℃ / 8 h
Environment
Heated chamber

ອຸປະກອນທີ່ຮອງຮັບ

BOLIN BL10-C direct pellet extrusion: officially supported; a heated chamber plus 60–120℃ bed handles high-temperature forming. PC absorbs moisture, so dry at 80℃ for 8h first. Comparable FGF systems need nozzles stable to 280–310℃ and a fully enclosed chamber.

ຄ່າເຫຼົ່ານີ້ແມ່ນຜົນການທົດສອບທົ່ວໄປ ການປະຕິບັດຕົວຈິງຂຶ້ນກັບເຄື່ອງ ສູດ ຂະບວນການ ແລະ ສະພາບແວດລ້ອມ.

Custom colors available

ລຸ້ນທີ່ກ່ຽວຂ້ອງ

ລາຍການເມັດພລາສຕິກ →

ສອບຖາມຕົວຢ່າງ ແລະ ການສະໜອງຈຳນວນຫຼາຍ

ບອກຂະໜາດຊິ້ນສ່ວນ ວັດສະດຸ ແລະ ກຳລັງການຜະລິດ ພວກເຮົາຈະຈັບຄູ່ເຄື່ອງ ຊັ້ນເມັດ ແລະ ພາຣາມິເຕີສະກູ.

ຂໍຄຳແນະນຳ

ບອກພວກເຮົາວ່າຕ້ອງການຜະລິດຊິ້ນສ່ວນແບບໃດ

ໃຊ້ສຳລັບຕອບຄຳຮ້ອງຂໍນີ້ເທົ່ານັ້ນ.

BOLIN 3D

BOLIN 3D · SINCE 2008

ການຄົ້ນຄວ້າ ແລະ ການຜະລິດອຸປະກອນພິມ 3D ລະດັບອຸດສາຫະກຳ, ສະໜອງວັດສະດຸ ແລະ ບໍລິການພິມຕາມຄຳສັ່ງ, ຄຸມຂອບເຂດອຸດສາຫະກຳການບິນ, ທັນຕະກຳແພດ, ຍານຍົນ, ວັດທະນະທຳສ້າງສັນ ແລະ ການຜະລິດທີ່ມີຄວາມຖືກຕ້ອງສູງ.

ທີ່ຢູ່ໂຮງງານ

Factory 1, Dingxing Intelligent Emergency Equipment Industrial Park, west of the Dongliangqing Temple Avenue and Zhenxing Road intersection, Liangyuan District, Shangqiu City, Henan Province

ຈັນ - ເສົາ 08:30–18:00, ບໍລິການດ້ານເຕັກນິກ 24 ຊົ່ວໂມງ/7 ມື້

ພາສາ ແລະ ພາກພື້ນ

© 2026 Henan Bolin 3D Printing Co., Ltd. · ສະຫງວນລິຂະສິດ

ຂໍຄຳແນະນຳ
WhatsAppຂໍຄຳແນະນຳ