PC Polycarbonate Pellets Pelet
PeletPellet · FGF / FDM · Industrial pellet 3D printer

PC Polycarbonate Pellets

An engineering grade with standout impact strength, heat resistance above 130℃ and translucency, for high-temperature duty, load-bearing structures and electrical insulation in large parts.

  • BL10-C supported
  • Tensile 55–70 MPa
  • Heat 130–145 ℃
  • High impact
Extrusion temp.
260–310 ℃
Suhu katil berpemanas
90–110 ℃

Key features

Standout impact strength

Around 34.8 kJ/m² keeps protective structures from brittle failure on impact.

Heat resistant and stable

Heat deflection of 117–145℃ holds structural integrity in hot service.

Translucent and insulating

Natural translucency plus good electrical insulation suits electrical and optical parts.

Drying process included

Ahead of printing, 80℃ for 8h in a convection dryer reduces bubbles and silver streaks.

App

  • High-temperature parts
  • Electrical & insulation
  • Translucent structures
  • Automotive & Transportation
  • Load-bearing tooling
  • Large protective guards

Pemeriksaan kilang

Bulk density 0.63–0.66 g/cm³, moisture and MFR checked per batch; drying card plus BL10-C sample verification included.

Sifat fizikal

Density
1.20 g/cm³ASTM D792
Bulk density
0.63–0.66 g/cm³ISO 60
Tensile strength
55–70 MPaASTM D638
Flexural strength
80–108 MPaASTM D790
Flexural modulus
2.0–2.5 GPaASTM D790
Impact strength
≈ 34.8 kJ/m²ISO 179
Heat deflection temp.
117–145 ℃ISO 75(0.45MPa)
Melt flow rate
15–32 g/10minASTM D1238(300℃/1.2kg)

Parameter proses disyorkan

Extrusion temp.
260–310 ℃
Suhu katil berpemanas
90–110 ℃
Pre-print drying
80 ℃ / 8 h
Environment
Heated chamber

Peralatan serasi

BOLIN BL10-C direct pellet extrusion: officially supported; a heated chamber plus 60–120℃ bed handles high-temperature forming. PC absorbs moisture, so dry at 80℃ for 8h first. Comparable FGF systems need nozzles stable to 280–310℃ and a fully enclosed chamber.

Nilai ini keputusan ujian tipikal; prestasi sebenar bergantung pada mesin, formulasi, proses dan persekitaran.

Custom colors available

Related Models

Senarai pelet →
ABS Engineering Pellets Pelet

ABS Engineering Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Tough and impact resistant
  • Lower cost on large parts
  • Officially supported by BL10-C
Density
1.04 g/cm³
Tensile strength
35–45 MPa
Flexural strength
60–70 MPa
PP Polypropylene Pellets Pelet

PP Polypropylene Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Light with low density
  • Resists acid, alkali and solvents
  • Almost no water absorption
Density
0.90 g/cm³
Melting temperature
160–170 ℃
Tensile strength
30–35 MPa
PETG Copolyester Pellets Pelet

PETG Copolyester Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Strong layer bonding
  • Low warpage, easy forming
  • Clear or food-grade options
Density
1.27 g/cm³
Tensile strength
45–55 MPa
Flexural strength
65–75 MPa

Tanya tentang sampel dan bekalan pukal

Beritahu saiz bahagian, bahan dan kapasiti; kami padankan mesin, gred pelet dan parameter skru.

Request resolution

Tell us what you need to print

Only used to answer this question.

BOLIN 3D

BOLIN 3D · SINCE 2008

Research, development, and manufacturing of industrial-grade 3D printing equipment; providing consumables and custom printing services for aerospace, medical and dental, automotive, creative industries, and precision manufacturing.

Factory address

260 meters south of the intersection of Qingliangsi Road and Zhenxing Road, Liangyuan District, Shangqiu City, Henan Province, west side of the road, Building No. 1, Dingxing Smart Emergency Equipment Industrial Park

Monday–Saturday 08:30–18:00, technical support 7×24 hours

Language and region

© 2026 Henan Bolin 3D Printing Co., Ltd. · All rights reserved

Request resolution
WhatsAppRequest resolution