
ABS Engineering Pellets
Pellet · FGF / FDM · Industrial pellet 3D printer
- Tough and impact resistant
- Lower cost on large parts
- Officially supported by BL10-C
- Density
- 1.04 g/cm³
- Tensile strength
- 35–45 MPa
- Flexural strength
- 60–70 MPa

A light material at 0.90 g/cm³ that resists acids, alkalis and fatigue and absorbs almost no water, suited to chemical containers, corrosion-resistant liners and lightweight large structures.
Lighter engineering plastic
At 0.90 g/cm³, large parts shed weight and are easier to move and install.
Acid, alkali and solvent resistant
Stable against acids, alkalis, alcohols and most solvents, fitting chemical and lab settings.
Fatigue resistant and ductile
Elongation above 200% keeps living hinges from cracking under repeated folding.
Almost no water uptake
Water absorption below 0.01% removes long drying steps in storage and production.
Controle de fábrica
Uniform pellets, consistent batch MFR and controlled condensation; foil moisture-barrier packing with a BL10-C process card.
Equipamentos compatíveis
BOLIN BL10-C direct pellet extrusion: officially supported; screw extrusion avoids soft PP bending in long feed paths. Use ≥1.0mm nozzles and 0.5–2.0mm layers. Comparable FGF systems need a PP-specific bed surface and 80–100℃ bed.
Os valores são resultados típicos de ensaio; o desempenho real varia conforme a máquina, a formulação, o processo e o ambiente.
Custom colors available

Pellet · FGF / FDM · Industrial pellet 3D printer

Pellet · FGF / FDM · Industrial pellet 3D printer

Pellet · FGF / FDM · Industrial pellet 3D printer
Informe tamanho da peça, material e volume; combinamos máquina, grau de granulado e parâmetros do fuso.