TPU Flexible Pellets 3D printing pellets
PelletsPellet · FGF / FDM · Industrial pellet 3D printer

TPU Flexible Pellets

An elastomer in pellet form for large flexible parts — seals, cushions, rollers and soft jaws — printed in one piece without seams.

  • Shore 80A–98A
  • Elongation 300–700%
  • Abrasion resistant
  • One-piece forming
Extrusion temp.
210–235 ℃
Bed temp.
40–60 ℃

Key features

High elasticity and rebound

Elongation of 300–700% survives repeated folding and compression without permanent set.

Abrasion and impact resistant

Oil and chemical resistance plus vibration damping suit constant wear and impact.

Large parts in one piece

Meter-scale flexible parts skip joining, keeping seals and structure intact.

Selectable hardness

Shore 80A–98A covers both soft-touch and load-bearing needs.

Applications

  • Large seals
  • Cushioning & damping
  • Tires & rollers
  • Soft jaws
  • Sports & protection
  • Industrial bumpers

Factory inspection

Hardness rechecked per batch by grade, with pellet size and MFR verification; moisture-barrier packing keeps soft pellets from clumping.

Physical properties

Shore hardness
80A–98AASTM D2240(可选牌号)
Density
1.18–1.22 g/cm³ASTM D792
Tensile strength
15–35 MPaASTM D638
Elongation at break
300–700%ASTM D638
Abrasion resistance
ExcellentTaber 磨耗
Long-term heat
60–80 ℃continuous
Oil resistance
Good耐油脂与多数溶剂
Pellet size
2–3 mm可选 2–5mm

Recommended process settings

Extrusion temp.
210–235 ℃
Bed temp.
40–60 ℃
Print speed
20–40 mm/s
Nozzle diameter
≥1.0 mm

Compatible equipment

BOLIN BL10-C direct pellet extrusion: the short screw path keeps soft material from buckling in long feeds; run cool and slow, usually without retraction. Comparable FGF systems need short feed paths and hopper drying to avoid clumping.

Figures are typical test values; actual results vary with machine, formulation, process and environment.

Custom colors available

Related models

All pellets →
ABS Engineering Pellets 3D printing pellets

ABS Engineering Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Tough and impact resistant
  • Lower cost on large parts
  • Officially supported by BL10-C
Density
1.04 g/cm³
Tensile strength
35–45 MPa
Flexural strength
60–70 MPa
PP Polypropylene Pellets 3D printing pellets

PP Polypropylene Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Light with low density
  • Resists acid, alkali and solvents
  • Almost no water absorption
Density
0.90 g/cm³
Melting temperature
160–170 ℃
Tensile strength
30–35 MPa
PC Polycarbonate Pellets 3D printing pellets

PC Polycarbonate Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • High impact resistance
  • Heat resistant, dimensionally stable
  • Translucent and insulating
Density
1.20 g/cm³
Bulk density
0.63–0.66 g/cm³
Tensile strength
55–70 MPa

Ask about samples and bulk supply

Share part size, material and output needs; our engineers match machine, pellet grade and screw process parameters.

Request a solution

Tell us what you need to build

Use only to reply to this inquiry.

Bolin 3D

BOLIN 3D · SINCE 2008

Industrial 3D printing systems, materials and custom print services for aerospace, medical, automotive, creative and precision manufacturing.

Factory address

Plant 1, Dingxing Intelligent Emergency Equipment Industrial Park, 260 m south of the intersection of Qingliangsi Avenue and Zhenxing Road, Liangyuan District, Shangqiu, Henan, China

Mon–Sat 08:30–18:00, 24/7 technical support

Language & region

© 2026 Henan Bolin 3D Printing Co., Ltd. · All rights reserved

Request a solution
WhatsAppRequest a solution