TPU Flexible Pellets Granulado
GranuladoPellet · FGF / FDM · Industrial pellet 3D printer

TPU Flexible Pellets

An elastomer in pellet form for large flexible parts — seals, cushions, rollers and soft jaws — printed in one piece without seams.

  • Shore 80A–98A
  • Elongation 300–700%
  • Abrasion resistant
  • One-piece forming
Extrusion temp.
210–235 ℃
Hot bed temperature
40–60 ℃

Ventajas

High elasticity and rebound

Elongation of 300–700% survives repeated folding and compression without permanent set.

Abrasion and impact resistant

Oil and chemical resistance plus vibration damping suit constant wear and impact.

Large parts in one piece

Meter-scale flexible parts skip joining, keeping seals and structure intact.

Selectable hardness

Shore 80A–98A covers both soft-touch and load-bearing needs.

Apps

  • Large seals
  • Cushioning & damping
  • Tires & rollers
  • Soft jaws
  • Sports & protection
  • Industrial bumpers

Control de fábrica

Hardness rechecked per batch by grade, with pellet size and MFR verification; moisture-barrier packing keeps soft pellets from clumping.

Propiedades físicas

Shore hardness
80A–98AASTM D2240(可选牌号)
Density
1.18–1.22 g/cm³ASTM D792
Tensile strength
15–35 MPaASTM D638
Elongation at break
300–700%ASTM D638
Abrasion resistance
ExcellentTaber 磨耗
Long-term heat
60–80 ℃continuous
Oil resistance
Good耐油脂与多数溶剂
Pellet size
2–3 mm可选 2–5mm

Parámetros de proceso recomendados

Extrusion temp.
210–235 ℃
Hot bed temperature
40–60 ℃
Print speed
20–40 mm/s
Nozzle Diameter
≥1.0 mm

Equipos compatibles

BOLIN BL10-C direct pellet extrusion: the short screw path keeps soft material from buckling in long feeds; run cool and slow, usually without retraction. Comparable FGF systems need short feed paths and hopper drying to avoid clumping.

Los valores son resultados de ensayo típicos; el rendimiento real varía según la máquina, la formulación, el proceso y el entorno.

Custom colors available

ABS Engineering Pellets Granulado

ABS Engineering Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Tough and impact resistant
  • Lower cost on large parts
  • Officially supported by BL10-C
Density
1.04 g/cm³
Tensile strength
35–45 MPa
Flexural strength
60–70 MPa
View detailsGranulado
PP Polypropylene Pellets Granulado

PP Polypropylene Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Light with low density
  • Resists acid, alkali and solvents
  • Almost no water absorption
Density
0.90 g/cm³
Melting temperature
160–170 ℃
Tensile strength
30–35 MPa
View detailsGranulado
PC Polycarbonate Pellets Granulado

PC Polycarbonate Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • High impact resistance
  • Heat resistant, dimensionally stable
  • Translucent and insulating
Density
1.20 g/cm³
Bulk density
0.63–0.66 g/cm³
Tensile strength
55–70 MPa
View detailsGranulado

Consultar muestras y suministro por volumen

Indique el tamaño de pieza, material y producción; ajustamos máquina, grado de granulado y parámetros de husillo.

Request a quote

Tell us what you need to manufacture

Only used to respond to this inquiry.

BOLIN 3D

BOLIN 3D · SINCE 2008

Design and manufacturing of industrial 3D printing equipment; we offer consumables and custom printing services for the aerospace, dental-medical, automotive, cultural creativity, and precision manufacturing sectors.

Factory Address

Carretera Qingliangsi Avenue, intersection with Zhenxing Road, 260 meters south, west side of the road, Building No. 1, Dingxing Intelligent Emergency Equipment Industrial Park, Liangyuan District, Shangqiu City, Henan Province

Monday through Saturday, 08:30–18:00; technical support 24/7

Language and region

© 2026 Henan Bolin 3D Printing Co., Ltd. · All rights reserved

Request a quote