
ABS Engineering Pellets
Pellet · FGF / FDM · Industrial pellet 3D printer
- Tough and impact resistant
- Lower cost on large parts
- Officially supported by BL10-C
- Density
- 1.04 g/cm³
- Tensile strength
- 35–45 MPa
- Flexural strength
- 60–70 MPa

An engineering grade with standout impact strength, heat resistance above 130℃ and translucency, for high-temperature duty, load-bearing structures and electrical insulation in large parts.
Standout impact strength
Around 34.8 kJ/m² keeps protective structures from brittle failure on impact.
Heat resistant and stable
Heat deflection of 117–145℃ holds structural integrity in hot service.
Translucent and insulating
Natural translucency plus good electrical insulation suits electrical and optical parts.
Drying process included
Ahead of printing, 80℃ for 8h in a convection dryer reduces bubbles and silver streaks.
Inspeksyon sa pabrika
Bulk density 0.63–0.66 g/cm³, moisture and MFR checked per batch; drying card plus BL10-C sample verification included.
Compatible na kagamitan
BOLIN BL10-C direct pellet extrusion: officially supported; a heated chamber plus 60–120℃ bed handles high-temperature forming. PC absorbs moisture, so dry at 80℃ for 8h first. Comparable FGF systems need nozzles stable to 280–310℃ and a fully enclosed chamber.
Karaniwang resulta ng pagsubok ang mga halaga; nag-iiba ang aktwal na performance ayon sa makina, formula, proseso at kapaligiran.
Custom colors available

Pellet · FGF / FDM · Industrial pellet 3D printer

Pellet · FGF / FDM · Industrial pellet 3D printer

Pellet · FGF / FDM · Industrial pellet 3D printer
Sabihin ang laki ng bahagi, materyal at kapasidad; itutugma namin ang makina, grade ng pellet at parameter ng screw.