PP Polypropylene Pellets Pellet
PelletPellet · FGF / FDM · Industrial pellet 3D printer

PP Polypropylene Pellets

A light material at 0.90 g/cm³ that resists acids, alkalis and fatigue and absorbs almost no water, suited to chemical containers, corrosion-resistant liners and lightweight large structures.

  • BL10-C supported
  • Density 0.90 g/cm³
  • Elongation >200%
  • Water absorption <0.01%
Extrusion temp.
220–260 ℃
Temperatura ng heated bed
80–100 ℃

Pangunahing katangian

Lighter engineering plastic

At 0.90 g/cm³, large parts shed weight and are easier to move and install.

Acid, alkali and solvent resistant

Stable against acids, alkalis, alcohols and most solvents, fitting chemical and lab settings.

Fatigue resistant and ductile

Elongation above 200% keeps living hinges from cracking under repeated folding.

Almost no water uptake

Water absorption below 0.01% removes long drying steps in storage and production.

Mga aplikasyon

  • Chemical tanks & liners
  • Lab & medical
  • Lightweight structures
  • Logistics containers
  • Living hinges
  • Food-contact parts

Inspeksyon sa pabrika

Uniform pellets, consistent batch MFR and controlled condensation; foil moisture-barrier packing with a BL10-C process card.

Pisikal na katangian

Density
0.90 g/cm³ASTM D792
Melting temperature
160–170 ℃DSC
Tensile strength
30–35 MPaASTM D638
Tensile modulus
1200–1500 MPaASTM D638
Flexural modulus
1200–1600 MPaASTM D790
Elongation at break
> 200%ASTM D638
Heat deflection temp.
95–105 ℃ISO 75(0.45MPa)
Water absorption
< 0.01%ASTM D570

Inirerekomendang process parameters

Extrusion temp.
220–260 ℃
Temperatura ng heated bed
80–100 ℃
Print Bill
20–60 mm/s
Diameter ng Nozzle
≥1.0 mm

Compatible na kagamitan

BOLIN BL10-C direct pellet extrusion: officially supported; screw extrusion avoids soft PP bending in long feed paths. Use ≥1.0mm nozzles and 0.5–2.0mm layers. Comparable FGF systems need a PP-specific bed surface and 80–100℃ bed.

Karaniwang resulta ng pagsubok ang mga halaga; nag-iiba ang aktwal na performance ayon sa makina, formula, proseso at kapaligiran.

Custom colors available

Kaugnay na modelo

Listahan ng pellet →
ABS Engineering Pellets Pellet

ABS Engineering Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Tough and impact resistant
  • Lower cost on large parts
  • Officially supported by BL10-C
Density
1.04 g/cm³
Tensile strength
35–45 MPa
Flexural strength
60–70 MPa
PC Polycarbonate Pellets Pellet

PC Polycarbonate Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • High impact resistance
  • Heat resistant, dimensionally stable
  • Translucent and insulating
Density
1.20 g/cm³
Bulk density
0.63–0.66 g/cm³
Tensile strength
55–70 MPa
PETG Copolyester Pellets Pellet

PETG Copolyester Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Strong layer bonding
  • Low warpage, easy forming
  • Clear or food-grade options
Density
1.27 g/cm³
Tensile strength
45–55 MPa
Flexural strength
65–75 MPa

Magtanong tungkol sa sample at bulk na suplay

Sabihin ang laki ng bahagi, materyal at kapasidad; itutugma namin ang makina, grade ng pellet at parameter ng screw.

Affordable solution

Tell us what you need to print

Used only to respond to this request.

BOLIN 3D

BOLIN 3D · SINCE 2008

R&D and manufacturing of industrial-grade 3D printing equipment, offering consumables and customized printing services for aerospace, medical/dental, automotive, cultural creativity, and precision manufacturing.

Factory address

Roadside area, 260 meters south of the intersection of Qingliangsi Avenue and Zhenxing Road, Liangyuan District, Shangqiu City, Henan Province, Building No. 1, Dingxing Intelligent Emergency Equipment Industrial Park

Monday through Saturday 08:30–18:00, 7×24 hours of technical support

Wika at rehiyon

© 2026 Henan Bolin 3D Printing Co., Ltd. · All rights reserved

Humbling solution
WhatsAppHumbling solution