The scenario determines the process, and the process determines the model.

Five sectors correspond to different print sizes, surface requirements, and production speeds. Below, we detail the recommended machines, materials, and post-processing methods for each scenario to help you compare them with your project.

Validation of lightweight structural parts and complex flow channels
AerospaceIllustrative scene

01 · Validation of lightweight structural components and complex flow channels

Aerospace

During structural validation, quickly produce near-final prototypes using large-format printing to reduce wind tunnel and assembly validation cycles. The SLA800 supports fine structures and transparent parts, while the BL10 series handles large shells and tooling.

  • Impression of complex flow channels and thin-walled structures
  • Rapid iteration of weight-reduction validation prototypes
  • Partial replacement of mechanical machining during the prototyping phase
Recommended modelsSLA800BL10-D

Related searches

State of the Art of Electric Arc Additive Manufacturing for Titanium Alloys in Aerospace

Journal of Materials Engineering and Performance, 2022

Read original article
Get advice for this use case
Dental models, prosthetics, and surgical guides
Medical and DentalIllustrative Scene

02 · Dental models, prosthetics, and surgical-assisted models

Medical and Dental

The HF series uses high-resolution projection to print dental models and base plates, with an optimized build plate boosting productivity per station. Planning models streamline preoperative communication and plan validation, reducing iteration-related costs.

  • Batch stacking of full-denture models on tray
  • Accurate high-resolution detail reproduction
  • Fast delivery of preoperative planning models
Recommended modelsHF-DL1HF-L3Pro

Related searches

Comparison of fidelity and accuracy across 12 dental 3D printers

BDJ Open (Nature portfolio), 2022

Read original article
Request advice for this use case
Interior and exterior prototype parts, bumpers, and tooling
Automotive and TransportationIllustrative scene

03 · Interior and exterior prototype parts, bumpers, and tooling

Automotive and Transportation

The 1000 mm class print volume enables monolithic printing of large parts like bumpers and dashboard structures, reducing assembly and joint finishing. PETG, ABS, and PP engineering materials meet aesthetic validation and assembly validation requirements.

  • Monoblock bumper and large interior trim component fabrication
  • Validate assembly and perform aesthetic review in parallel
  • Quick jig replacement
Recommended modelsBL10-A / BL10-BBL10-C

Related searches

Review of Arc-Based Additive Manufacturing Applications for Aluminum Alloys in Aerospace and Automotive Industries

Materials Science and Technology, 2022

Read original article
Get advice for this use case
Stage props, sculptures, and large-scale art installations
Cultural Creation and AdvertisingIllustrative Scene

04 · Stage props, large-scale sculptures, and artistic installations

Cultural Creation and Advertising

Advertising and exhibition projects have tight deadlines and large dimensions. The BL10 series enables full-part printing in just a few days, supporting silk-like, gradient, and multi-color filaments for advanced surface effects. After post-processing, parts can be painted and assembled.

  • Full-piece printing to minimize assembly lines
  • Performance of Multicolor and Gradient Materials
  • Surface painting and secondary machining
Recommended ModelsBL10-A / BL10-BBL10-C

Related searches

Digital Twin for Large-Scale Additive Manufacturing: Extrusion of Carbon-Short-Fiber-Reinforced ABS Granules

Proceedings of the Institution of Mechanical Engineers, Part L: 2023

Read original article
Request advice for this use case
Fixturing templates, small-batch parts, and master models
Precision FabricationIllustrative Scene

05 · Fixation templates, small-batch parts, and master models

Precision Fabrication

For small batches and part variety, 3D printing eliminates the molding step and delivers directly. The SLA800 and HF series ensure detail and assembly surface precision, while the BL10-D meets the strength requirements for structural parts and jigs.

  • Small-batch delivery without molds
  • Precision control of contact surfaces and fine details
  • Rapid iteration of templates and inspection tools
Recommended modelsSLA800BL10-D

Related searches

3D Printing on the International Space Station: Fabricating Plastics and Metals in Orbit

NASA · ISS Research

Read original article
Get advice for this use case

Publications and Research

Process limitations: findings from published studies

The references below are drawn from published articles and institutional studies, illustrating the application limits and technological evolution directions of various processes. Conclusions are based on original texts and do not constitute commitments to specific projects.

Large-format extrusion2023

Digital Twin for Large-Scale Additive Manufacturing: Extrusion of Carbon-Short-Fiber-Reinforced ABS Granules

Molded ABS blade with 3D-printed short carbon fiber reinforcement (20%). This study links material microstructure, homogenization models, and final part deformation, identifying warpage and residual stresses as the primary sources of distortion in large-scale components. Effective control requires integrated material modeling and process simulation.

Proceedings of the Institution of Mechanical Engineers, Part L: 2023

Corresponding use case:Cultural Creation and AdvertisingRead original article
Dental stereolithography2022

Comparison of fidelity and accuracy across 12 dental 3D printers

Cross-comparison of 12 common clinical devices on the same test block with a uniform layer thickness of 100 μm, measured using a laboratory scanner. Results show consistent accuracy differences across price ranges, attributed to optical resolution, manufacturing orientation, and process parameters.

BDJ Open (Nature portfolio), 2022

Corresponding use case:Medical and DentalRead the original article
Electric Arc Metal Additive Fabrication2022

Review of Arc-Based Additive Manufacturing Applications for Aluminum Alloys in Aerospace and Automotive Industries

Research Summary on Arc Additive Manufacturing of Aluminum Alloys for Aerospace and Automotive Components: This process is well-suited for medium-to-large structures, offering improved material utilization and shorter lead times compared to monolithic machining. However, thermal input-induced distortions, porosity, and microstructural anisotropy require optimization of process parameters and post-fabrication treatments.

Materials Science and Technology, 2022

Corresponding use case:Automotive and TransportationRead original article
Electric arc additive metal fabrication2022

State of the Art on Electric Arc Additive Manufacturing for Titanium Alloys in Aerospace Applications

Analysis of progress in arc additive manufacturing for titanium alloys in fuselage structures and engine components, highlighting that reducing the buy-to-fly ratio is the primary driver; key technical challenges to resolve before mass production include porosity, delamination, residual stresses, crack propagation, and oxidation.

Journal of Materials Engineering and Performance, 2022

Corresponding use case:AerospaceRead original article
Architectural impression2018

3D Concrete Extrusion Printing: Research Roadmap

Joint analysis of rheological properties, setting behavior, and formed geometry in fresh cementitious materials. Process constraints are structured around two applications: prefabricated element manufacturing and in-situ wall construction, thereby defining a problem matrix for future research.

Cement and Concrete Research, 2018

Read original article
In-orbit fabrication2014—

3D Printing on the International Space Station: Fabricating Plastics and Metals in Orbit

In 2014, the first plastic extrusion 3D printer was sent to space, producing more than a dozen tools and parts, including wrenches. Subsequent experiments focused on stainless steel metal printing. Comparisons between space-fabricated parts and ground-based control samples showed that microgravity had no significant impact on the extrusion shaping process.

NASA · ISS Research

Corresponding use case:Precision FabricationRead the original article

Learn more:ISO/ASTM 52900:2021Additive Manufacturing: Terminology and ClassificationReview of Materials and Additive Manufacturing Methods (Composite Structures, 2021)

Can't find the scenario you're looking for?

Share the intended use, dimensions, and environmental conditions of your parts. Our engineers will determine whether FDM or stereolithography is best suited for your needs.

Request a solution

BOLIN 3D

BOLIN 3D · SINCE 2008

R&D and manufacturing of industrial 3D printing equipment, providing consumables and custom printing services for aerospace, medical/dental, automotive, cultural/creative, and precision manufacturing sectors.

Factory Address

West side of the road, 260 meters south of the intersection between Qingliangsi Avenue and Zhenxing Road, Building 1, Dingxing Intelligent Emergency Equipment Industrial Park, Liangyuan District, Shangqiu City, Henan Province

Monday through Saturday, 08:30–18:00; technical support 7 days/7, 2 hours/24

Language and region

© 2026 Henan Bolin 3D Printing Co., Ltd. · All rights reserved

Request a solution
WhatsAppRequest a solution