
PP Polypropylene Pellets
Pellet · FGF / FDM · Industrial pellet 3D printer
- Light with low density
- Resists acid, alkali and solvents
- Almost no water absorption
- Density
- 0.90 g/cm³
- Melting temperature
- 160–170 ℃
- Tensile strength
- 30–35 MPa

A classic engineering plastic with toughness, impact strength and steam-polishable surfaces; pellet form skips the filamentizing step for large industrial prototypes, tooling and display structures.
Tough and impact resistant
Resists brittle failure under load, suited to jigs handled and assembled frequently.
Easy post-processing
Sanding, drilling and acetone vapor polishing bring large parts to a smooth finish.
Lower cost on large parts
Direct pellet feed removes filamentizing cost, cutting material spend on meter-scale parts.
Heated chamber limits warpage
With the BL10-C heated chamber and a 60–120℃ bed, large parts form more reliably.
Contrôle en usine
Uniform 2–3mm pellets, bulk density and MFR checked per batch; sample parts printed on BL10-C before shipping.
Équipements compatibles
BOLIN BL10-C direct pellet extrusion: 900×900×900mm build, screw extrusion, about 7–10kg per 24h, 0.8 / 1.2 / 1.5mm nozzles. Comparable FGF / FPF screw systems accept 2–5mm pellets; a heated chamber is recommended to limit warpage.
Les valeurs sont des résultats d'essai typiques ; les performances réelles varient selon la machine, la formulation, le procédé et l'environnement.
Custom colors available

Pellet · FGF / FDM · Industrial pellet 3D printer

Pellet · FGF / FDM · Industrial pellet 3D printer

Pellet · FGF / FDM · Industrial pellet 3D printer
Indiquez la taille des pièces, la matière et le volume ; nous associons machine, grade de granulés et paramètres de vis.