
ABS Engineering Pellets
Pellet · FGF / FDM · Industrial pellet 3D printer
- Tough and impact resistant
- Lower cost on large parts
- Officially supported by BL10-C
- Density
- 1.04 g/cm³
- Tensile strength
- 35–45 MPa
- Flexural strength
- 60–70 MPa

10–40% glass or carbon fiber in ABS, PP, PC or PA bases raises stiffness, strength and dimensional stability for large load-bearing parts and low-warpage molds.
Much higher stiffness
Carbon fiber lifts stiffness 30–60%, keeping large thin walls from sagging.
Low warpage and stable size
Fiber restrains shrinkage, so meter-scale parts hold dimensions with less rework.
Pellet form is more flexible
Compounds go straight into pellet extrusion, avoiding filamentizing issues at high loadings.
Heat and fatigue resistant
Glass fiber raises strength and heat deflection 20–50% for long-term loading.
工場検査
Fiber content and dispersion, pellet size and MFR checked per batch; base resin and filler ratio can be tailored with sample verification.
対応装置
BOLIN BL10-C direct pellet extrusion: screw extrusion suits filled compounds that would wear out filament feeders. Fiber wears nozzles, so use hardened steel nozzles with a larger diameter.
本シリーズの数値は代表的な試験値であり、実際の性能は装置・配合・プロセス・環境により異なります。
Custom color and formulation

Pellet · FGF / FDM · Industrial pellet 3D printer

Pellet · FGF / FDM · Industrial pellet 3D printer

Pellet · FGF / FDM · Industrial pellet 3D printer
部品サイズ・材料・生産量をお知らせください。機種・ペレット銘柄・スクリュー条件をご提案します。