Glass / Carbon Fiber Pellets Pelet
PeletPellet · FGF / FDM · Industrial pellet 3D printer

Glass / Carbon Fiber Pellets

10–40% glass or carbon fiber in ABS, PP, PC or PA bases raises stiffness, strength and dimensional stability for large load-bearing parts and low-warpage molds.

  • Fiber 10–40%
  • Stiffness +30–60%
  • Low warpage
  • Dimensional stability
Extrusion temp.
240–300 ℃
Suhu katil berpemanas
90–110 ℃

Ciri utama

Much higher stiffness

Carbon fiber lifts stiffness 30–60%, keeping large thin walls from sagging.

Low warpage and stable size

Fiber restrains shrinkage, so meter-scale parts hold dimensions with less rework.

Pellet form is more flexible

Compounds go straight into pellet extrusion, avoiding filamentizing issues at high loadings.

Heat and fatigue resistant

Glass fiber raises strength and heat deflection 20–50% for long-term loading.

Aplikasi

  • Large molds & masters
  • Aeroangkasa
  • Automotive structures
  • Robotics & automation
  • Dimensionally stable parts
  • Recycled material reuse

Pemeriksaan kilang

Fiber content and dispersion, pellet size and MFR checked per batch; base resin and filler ratio can be tailored with sample verification.

Sifat fizikal

Fiber content
10–40 wt%玻纤 / 碳纤可选
Stiffness gain
30–60%对比未增强基体(CF)
Strength gain
20–50%对比未增强基体(GF)
Density
1.15–1.45 g/cm³随基体与填料变化
Warpage
Much lower大件实机验证
Heat deflection temp.
提升 20–50 ℃ISO 75(0.45MPa)
Matrix options
ABS / PP / PC / PA按需定制配方
Pellet size
2–4 mm增强颗粒专用规格

Parameter proses disyorkan

Extrusion temp.
240–300 ℃
Suhu katil berpemanas
90–110 ℃
Diameter Muncung
≥1.2 mm(硬化钢)
Environment
Heated chamber

Peralatan serasi

BOLIN BL10-C direct pellet extrusion: screw extrusion suits filled compounds that would wear out filament feeders. Fiber wears nozzles, so use hardened steel nozzles with a larger diameter.

Nilai ini keputusan ujian tipikal; prestasi sebenar bergantung pada mesin, formulasi, proses dan persekitaran.

Custom color and formulation

Model berkaitan

Senarai pelet →
ABS Engineering Pellets Pelet

ABS Engineering Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Tough and impact resistant
  • Lower cost on large parts
  • Officially supported by BL10-C
Density
1.04 g/cm³
Tensile strength
35–45 MPa
Flexural strength
60–70 MPa
PP Polypropylene Pellets Pelet

PP Polypropylene Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Light with low density
  • Resists acid, alkali and solvents
  • Almost no water absorption
Density
0.90 g/cm³
Melting temperature
160–170 ℃
Tensile strength
30–35 MPa
PC Polycarbonate Pellets Pelet

PC Polycarbonate Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • High impact resistance
  • Heat resistant, dimensionally stable
  • Translucent and insulating
Density
1.20 g/cm³
Bulk density
0.63–0.66 g/cm³
Tensile strength
55–70 MPa

Tanya tentang sampel dan bekalan pukal

Beritahu saiz bahagian, bahan dan kapasiti; kami padankan mesin, gred pelet dan parameter skru.

Minta penyelesaian

Beritahu kami apa yang perlu dicetak

Hanya digunakan untuk menjawab pertanyaan ini.

BOLIN 3D

BOLIN 3D · SINCE 2008

Research, development, and manufacturing of industrial-grade 3D printing equipment; providing consumables and custom printing services for aerospace, medical and dental, automotive, creative industries, and precision manufacturing.

Factory address

260 meters south of the intersection of Qingliangsi Road and Zhenxing Road, Liangyuan District, Shangqiu City, Henan Province, west side of the road, Building No. 1, Dingxing Smart Emergency Equipment Industrial Park

Monday–Saturday 08:30–18:00, technical support 7×24 hours

Language and region

© 2026 Henan Bolin 3D Printing Co., Ltd. · All rights reserved

Request resolution
WhatsAppRequest resolution