TPU Flexible Pellets Pelet
PeletPellet · FGF / FDM · Industrial pellet 3D printer

TPU Flexible Pellets

An elastomer in pellet form for large flexible parts — seals, cushions, rollers and soft jaws — printed in one piece without seams.

  • Shore 80A–98A
  • Elongation 300–700%
  • Abrasion resistant
  • One-piece forming
Extrusion temp.
210–235 ℃
Suhu katil berpemanas
40–60 ℃

Key features

High elasticity and rebound

Elongation of 300–700% survives repeated folding and compression without permanent set.

Abrasion and impact resistant

Oil and chemical resistance plus vibration damping suit constant wear and impact.

Large parts in one piece

Meter-scale flexible parts skip joining, keeping seals and structure intact.

Selectable hardness

Shore 80A–98A covers both soft-touch and load-bearing needs.

App

  • Large seals
  • Cushioning & damping
  • Tires & rollers
  • Soft jaws
  • Sports & protection
  • Industrial bumpers

Pemeriksaan kilang

Hardness rechecked per batch by grade, with pellet size and MFR verification; moisture-barrier packing keeps soft pellets from clumping.

Sifat fizikal

Shore hardness
80A–98AASTM D2240(可选牌号)
Density
1.18–1.22 g/cm³ASTM D792
Tensile strength
15–35 MPaASTM D638
Elongation at break
300–700%ASTM D638
Abrasion resistance
ExcellentTaber 磨耗
Long-term heat
60–80 ℃continuous
Oil resistance
Good耐油脂与多数溶剂
Pellet size
2–3 mm可选 2–5mm

Parameter proses disyorkan

Extrusion temp.
210–235 ℃
Suhu katil berpemanas
40–60 ℃
Print Speed
20–40 mm/s
Diameter Muncung
≥1.0 mm

Peralatan serasi

BOLIN BL10-C direct pellet extrusion: the short screw path keeps soft material from buckling in long feeds; run cool and slow, usually without retraction. Comparable FGF systems need short feed paths and hopper drying to avoid clumping.

Nilai ini keputusan ujian tipikal; prestasi sebenar bergantung pada mesin, formulasi, proses dan persekitaran.

Custom colors available

Related Models

Senarai pelet →
ABS Engineering Pellets Pelet

ABS Engineering Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Tough and impact resistant
  • Lower cost on large parts
  • Officially supported by BL10-C
Density
1.04 g/cm³
Tensile strength
35–45 MPa
Flexural strength
60–70 MPa
PP Polypropylene Pellets Pelet

PP Polypropylene Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Light with low density
  • Resists acid, alkali and solvents
  • Almost no water absorption
Density
0.90 g/cm³
Melting temperature
160–170 ℃
Tensile strength
30–35 MPa
PC Polycarbonate Pellets Pelet

PC Polycarbonate Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • High impact resistance
  • Heat resistant, dimensionally stable
  • Translucent and insulating
Density
1.20 g/cm³
Bulk density
0.63–0.66 g/cm³
Tensile strength
55–70 MPa

Tanya tentang sampel dan bekalan pukal

Beritahu saiz bahagian, bahan dan kapasiti; kami padankan mesin, gred pelet dan parameter skru.

Request resolution

Tell us what you need to print

Only used to answer this question.

BOLIN 3D

BOLIN 3D · SINCE 2008

Research, development, and manufacturing of industrial-grade 3D printing equipment; providing consumables and custom printing services for aerospace, medical and dental, automotive, creative industries, and precision manufacturing.

Factory address

260 meters south of the intersection of Qingliangsi Road and Zhenxing Road, Liangyuan District, Shangqiu City, Henan Province, west side of the road, Building No. 1, Dingxing Smart Emergency Equipment Industrial Park

Monday–Saturday 08:30–18:00, technical support 7×24 hours

Language and region

© 2026 Henan Bolin 3D Printing Co., Ltd. · All rights reserved

Request resolution
WhatsAppRequest resolution