PC Polycarbonate Pellets Hạt nhựa in
Hạt nhựa inPellet · FGF / FDM · Industrial pellet 3D printer

PC Polycarbonate Pellets

An engineering grade with standout impact strength, heat resistance above 130℃ and translucency, for high-temperature duty, load-bearing structures and electrical insulation in large parts.

  • BL10-C supported
  • Tensile 55–70 MPa
  • Heat 130–145 ℃
  • High impact
Extrusion temp.
260–310 ℃
Nhiệt độ giường nhiệt
90–110 ℃

Đặc điểm

Standout impact strength

Around 34.8 kJ/m² keeps protective structures from brittle failure on impact.

Heat resistant and stable

Heat deflection of 117–145℃ holds structural integrity in hot service.

Translucent and insulating

Natural translucency plus good electrical insulation suits electrical and optical parts.

Drying process included

Ahead of printing, 80℃ for 8h in a convection dryer reduces bubbles and silver streaks.

Ứng dụng

  • High-temperature parts
  • Electrical & insulation
  • Translucent structures
  • Ô tô và Giao thông vận tải
  • Load-bearing tooling
  • Large protective guards

Kiểm tra tại nhà máy

Bulk density 0.63–0.66 g/cm³, moisture and MFR checked per batch; drying card plus BL10-C sample verification included.

Tính chất vật lý

Density
1.20 g/cm³ASTM D792
Bulk density
0.63–0.66 g/cm³ISO 60
Tensile strength
55–70 MPaASTM D638
Flexural strength
80–108 MPaASTM D790
Flexural modulus
2.0–2.5 GPaASTM D790
Impact strength
≈ 34.8 kJ/m²ISO 179
Heat deflection temp.
117–145 ℃ISO 75(0.45MPa)
Melt flow rate
15–32 g/10minASTM D1238(300℃/1.2kg)

Thông số quy trình đề xuất

Extrusion temp.
260–310 ℃
Nhiệt độ giường nhiệt
90–110 ℃
Pre-print drying
80 ℃ / 8 h
Environment
Heated chamber

Thiết bị tương thích

BOLIN BL10-C direct pellet extrusion: officially supported; a heated chamber plus 60–120℃ bed handles high-temperature forming. PC absorbs moisture, so dry at 80℃ for 8h first. Comparable FGF systems need nozzles stable to 280–310℃ and a fully enclosed chamber.

Các giá trị là kết quả thử nghiệm điển hình; hiệu suất thực tế thay đổi theo thiết bị, công thức, quy trình và môi trường.

Custom colors available

ABS Engineering Pellets Hạt nhựa in

ABS Engineering Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Tough and impact resistant
  • Lower cost on large parts
  • Officially supported by BL10-C
Density
1.04 g/cm³
Tensile strength
35–45 MPa
Flexural strength
60–70 MPa
Xem chi tiếtHạt nhựa in
PP Polypropylene Pellets Hạt nhựa in

PP Polypropylene Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Light with low density
  • Resists acid, alkali and solvents
  • Almost no water absorption
Density
0.90 g/cm³
Melting temperature
160–170 ℃
Tensile strength
30–35 MPa
Xem chi tiếtHạt nhựa in
PETG Copolyester Pellets Hạt nhựa in

PETG Copolyester Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Strong layer bonding
  • Low warpage, easy forming
  • Clear or food-grade options
Density
1.27 g/cm³
Tensile strength
45–55 MPa
Flexural strength
65–75 MPa
Xem chi tiếtHạt nhựa in

Tư vấn mẫu và cung cấp số lượng lớn

Cho biết kích thước chi tiết, vật liệu và sản lượng; chúng tôi sẽ khớp máy, mác hạt và thông số trục vít.

Yêu cầu giải pháp

Cho chúng tôi biết đối tượng cần in

Chỉ dùng để phản hồi yêu cầu này.

BOLIN 3D

BOLIN 3D · SINCE 2008

Research, development, and manufacturing of industrial-grade 3D printers; providing consumable materials and custom printing services for aerospace, medical-dental, automotive, creative culture, and precision manufacturing industries.

Factory Address

Building 1, Dingxing Smart Emergency Equipment Industrial Park, west side of the road, 260 meters south of the intersection of Qingliangsi Avenue and Zhenxing Road, Liangyuan District, Shangqiu City, Henan Province

Monday through Saturday 08:30–18:00; Technical Support 24/7

Language and region

© 2026 Bolin 3D Printing Co., Ltd. Ha Nam · All rights reserved

Solution Request
WhatsAppRequest solution