PP Polypropylene Pellets Hạt nhựa in
Hạt nhựa inPellet · FGF / FDM · Industrial pellet 3D printer

PP Polypropylene Pellets

A light material at 0.90 g/cm³ that resists acids, alkalis and fatigue and absorbs almost no water, suited to chemical containers, corrosion-resistant liners and lightweight large structures.

  • BL10-C supported
  • Density 0.90 g/cm³
  • Elongation >200%
  • Water absorption <0.01%
Extrusion temp.
220–260 ℃
Nhiệt độ giường nhiệt
80–100 ℃

Đặc điểm

Lighter engineering plastic

At 0.90 g/cm³, large parts shed weight and are easier to move and install.

Acid, alkali and solvent resistant

Stable against acids, alkalis, alcohols and most solvents, fitting chemical and lab settings.

Fatigue resistant and ductile

Elongation above 200% keeps living hinges from cracking under repeated folding.

Almost no water uptake

Water absorption below 0.01% removes long drying steps in storage and production.

App

  • Chemical tanks & liners
  • Lab & medical
  • Lightweight structures
  • Logistics containers
  • Living hinges
  • Food-contact parts

Kiểm tra tại nhà máy

Uniform pellets, consistent batch MFR and controlled condensation; foil moisture-barrier packing with a BL10-C process card.

Tính chất vật lý

Density
0.90 g/cm³ASTM D792
Melting temperature
160–170 ℃DSC
Tensile strength
30–35 MPaASTM D638
Tensile modulus
1200–1500 MPaASTM D638
Flexural modulus
1200–1600 MPaASTM D790
Elongation at break
> 200%ASTM D638
Heat deflection temp.
95–105 ℃ISO 75(0.45MPa)
Water absorption
< 0.01%ASTM D570

Thông số quy trình đề xuất

Extrusion temp.
220–260 ℃
Nhiệt độ giường nhiệt
80–100 ℃
Print speed
20–60 mm/s
Đường kính vòi phun
≥1.0 mm

Thiết bị tương thích

BOLIN BL10-C direct pellet extrusion: officially supported; screw extrusion avoids soft PP bending in long feed paths. Use ≥1.0mm nozzles and 0.5–2.0mm layers. Comparable FGF systems need a PP-specific bed surface and 80–100℃ bed.

Các giá trị là kết quả thử nghiệm điển hình; hiệu suất thực tế thay đổi theo thiết bị, công thức, quy trình và môi trường.

Custom colors available

ABS Engineering Pellets Hạt nhựa in

ABS Engineering Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Tough and impact resistant
  • Lower cost on large parts
  • Officially supported by BL10-C
Density
1.04 g/cm³
Tensile strength
35–45 MPa
Flexural strength
60–70 MPa
View detailsHạt nhựa in
PC Polycarbonate Pellets Hạt nhựa in

PC Polycarbonate Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • High impact resistance
  • Heat resistant, dimensionally stable
  • Translucent and insulating
Density
1.20 g/cm³
Bulk density
0.63–0.66 g/cm³
Tensile strength
55–70 MPa
View detailsHạt nhựa in
PETG Copolyester Pellets Hạt nhựa in

PETG Copolyester Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Strong layer bonding
  • Low warpage, easy forming
  • Clear or food-grade options
Density
1.27 g/cm³
Tensile strength
45–55 MPa
Flexural strength
65–75 MPa
View detailsHạt nhựa in

Tư vấn mẫu và cung cấp số lượng lớn

Cho biết kích thước chi tiết, vật liệu và sản lượng; chúng tôi sẽ khớp máy, mác hạt và thông số trục vít.

Request solution

Tell us what to print

For this request only.

BOLIN 3D

BOLIN 3D · SINCE 2008

Nghiên cứu, phát triển và sản xuất thiết bị in 3D cấp công nghiệp; cung cấp vật liệu tiêu hao và dịch vụ in tùy chỉnh, phục vụ các ngành hàng không vũ trụ, y tế – nha khoa, ô tô, văn hóa sáng tạo và chế tạo chính xác.

Địa chỉ nhà máy

Số 1, Nhà xưởng, Khu công nghiệp Thiết bị khẩn cấp thông minh Dingxing, phía tây đường, cách giao lộ Đại lộ Qingliangsi và Đường Zhenxing 260 mét về phía nam, Quận Lương Viên, Thành phố Thương Khâu, Tỉnh Hà Nam

Thứ Hai đến Thứ Bảy 08:30–18:00; hỗ trợ kỹ thuật 24/7

Ngôn ngữ và khu vực

© 2026 Công ty TNHH In 3D Bolin Hà Nam · Bảo lưu mọi quyền

Yêu cầu giải pháp
WhatsAppYêu cầu giải pháp