TPU Flexible Pellets Pellet
PelletPellet · FGF / FDM · Industrial pellet 3D printer

TPU Flexible Pellets

An elastomer in pellet form for large flexible parts — seals, cushions, rollers and soft jaws — printed in one piece without seams.

  • Shore 80A–98A
  • Elongation 300–700%
  • Abrasion resistant
  • One-piece forming
Extrusion temp.
210–235 ℃
Temperatura ng heated bed
40–60 ℃

Pangunahing katangian

High elasticity and rebound

Elongation of 300–700% survives repeated folding and compression without permanent set.

Abrasion and impact resistant

Oil and chemical resistance plus vibration damping suit constant wear and impact.

Large parts in one piece

Meter-scale flexible parts skip joining, keeping seals and structure intact.

Selectable hardness

Shore 80A–98A covers both soft-touch and load-bearing needs.

Mga aplikasyon

  • Large seals
  • Cushioning & damping
  • Tires & rollers
  • Soft jaws
  • Sports & protection
  • Industrial bumpers

Inspeksyon sa pabrika

Hardness rechecked per batch by grade, with pellet size and MFR verification; moisture-barrier packing keeps soft pellets from clumping.

Pisikal na katangian

Shore hardness
80A–98AASTM D2240(可选牌号)
Density
1.18–1.22 g/cm³ASTM D792
Tensile strength
15–35 MPaASTM D638
Elongation at break
300–700%ASTM D638
Abrasion resistance
ExcellentTaber 磨耗
Long-term heat
60–80 ℃continuous
Oil resistance
Good耐油脂与多数溶剂
Pellet size
2–3 mm可选 2–5mm

Inirerekomendang process parameters

Extrusion temp.
210–235 ℃
Temperatura ng heated bed
40–60 ℃
Bilis ng Pag-print
20–40 mm/s
Diameter ng Nozzle
≥1.0 mm

Compatible na kagamitan

BOLIN BL10-C direct pellet extrusion: the short screw path keeps soft material from buckling in long feeds; run cool and slow, usually without retraction. Comparable FGF systems need short feed paths and hopper drying to avoid clumping.

Karaniwang resulta ng pagsubok ang mga halaga; nag-iiba ang aktwal na performance ayon sa makina, formula, proseso at kapaligiran.

Custom colors available

Kaugnay na modelo

Listahan ng pellet →
ABS Engineering Pellets Pellet

ABS Engineering Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Tough and impact resistant
  • Lower cost on large parts
  • Officially supported by BL10-C
Density
1.04 g/cm³
Tensile strength
35–45 MPa
Flexural strength
60–70 MPa
PP Polypropylene Pellets Pellet

PP Polypropylene Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Light with low density
  • Resists acid, alkali and solvents
  • Almost no water absorption
Density
0.90 g/cm³
Melting temperature
160–170 ℃
Tensile strength
30–35 MPa
PC Polycarbonate Pellets Pellet

PC Polycarbonate Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • High impact resistance
  • Heat resistant, dimensionally stable
  • Translucent and insulating
Density
1.20 g/cm³
Bulk density
0.63–0.66 g/cm³
Tensile strength
55–70 MPa

Magtanong tungkol sa sample at bulk na suplay

Sabihin ang laki ng bahagi, materyal at kapasidad; itutugma namin ang makina, grade ng pellet at parameter ng screw.

Humiling ng solusyon

Sabihin sa amin kung ano ang kailangan mong i-print

Ginagamit lamang upang sagutin ang kahilingang ito.

BOLIN 3D

BOLIN 3D · SINCE 2008

R&D and manufacturing of industrial-grade 3D printing equipment, offering consumables and customized printing services for aerospace, medical/dental, automotive, cultural creativity, and precision manufacturing.

Factory address

Roadside area, 260 meters south of the intersection of Qingliangsi Avenue and Zhenxing Road, Liangyuan District, Shangqiu City, Henan Province, Building No. 1, Dingxing Intelligent Emergency Equipment Industrial Park

Monday through Saturday 08:30–18:00, 7×24 hours of technical support

Wika at rehiyon

© 2026 Henan Bolin 3D Printing Co., Ltd. · All rights reserved

Humbling solution
WhatsAppHumbling solution