ABS Engineering Pellets အလုံးမှုန့်
အလုံးမှုန့်Pellet · FGF / FDM · Industrial pellet 3D printer

ABS Engineering Pellets

A classic engineering plastic with toughness, impact strength and steam-polishable surfaces; pellet form skips the filamentizing step for large industrial prototypes, tooling and display structures.

  • BL10-C supported
  • Tensile 35–45 MPa
  • Heat 90–100 ℃
  • Acetone polishable
Extrusion temp.
230–260 ℃
အပူပေးခုံ အပူချိန်
90–110 ℃

ထုတ်ကုန် လက္ခဏာများ

Tough and impact resistant

Resists brittle failure under load, suited to jigs handled and assembled frequently.

Easy post-processing

Sanding, drilling and acetone vapor polishing bring large parts to a smooth finish.

Lower cost on large parts

Direct pellet feed removes filamentizing cost, cutting material spend on meter-scale parts.

Heated chamber limits warpage

With the BL10-C heated chamber and a 60–120℃ bed, large parts form more reliably.

အသုံးချမှုများ

  • Large tooling
  • မော်တော်ကားနှင့် သယ်ယူပို့ဆောင်ရေး
  • Displays & props
  • Casting & composite masters
  • Equipment housings
  • Architecture & models

စက်ရုံ စစ်ဆေးမှု

Uniform 2–3mm pellets, bulk density and MFR checked per batch; sample parts printed on BL10-C before shipping.

ရုပ်ပိုင်းဆိုင်ရာ ဂုဏ်သတ္တိ

Density
1.04 g/cm³ASTM D792
Tensile strength
35–45 MPaASTM D638
Flexural strength
60–70 MPaASTM D790
Flexural modulus
1.8–2.2 GPaASTM D790
Elongation at break
10–30%ASTM D638
Heat deflection temp.
90–100 ℃ISO 75(0.45MPa)
Pellet size
2–3 mm可选 2–5mm
Water absorption
LowASTM D570

အကြံပြု လုပ်ငန်းစဉ် ပါရာမီတာများ

Extrusion temp.
230–260 ℃
အပူပေးခုံ အပူချိန်
90–110 ℃
ပုံနှိပ် အမြန်နှုန်း
40–150 mm/s
နော်ဇယ် အချင်းဝက်
0.8–1.5 mm

သင့်လျော်သော စက်ပစ္စည်း

BOLIN BL10-C direct pellet extrusion: 900×900×900mm build, screw extrusion, about 7–10kg per 24h, 0.8 / 1.2 / 1.5mm nozzles. Comparable FGF / FPF screw systems accept 2–5mm pellets; a heated chamber is recommended to limit warpage.

တန်ဖိုးများသည် ပုံမှန် စမ်းသပ်မှု ရလဒ်များ ဖြစ်ပြီး အမှန်တကယ် စွမ်းဆောင်ရည်မှာ စက်၊ ဖော်စပ်မှု၊ လုပ်ငန်းစဉ်နှင့် ပတ်ဝန်းကျင်အပေါ် မူတည်ပါသည်။

Custom colors available

ဆက်စပ် မော်ဒယ်များ

အလုံးမှုန့် စာရင်း →

နမူနာနှင့် အစုလိုက် ပေးသွင်းမှု မေးမြန်း

အစိတ်အပိုင်း အရွယ်အစား၊ ပစ္စည်းနှင့် ထုတ်လုပ်နိုင်စွမ်းကို အသိပေးပါ။ စက်၊ အလုံးမှုန့်အဆင့်နှင့် ဝက်အူ ပါရာမီတာများကို ကိုက်ညီစေပါမည်။

အကြံပြုချက်တောင်းရန်

မည်သည့်ပုံစံကို ပုံသွင်းလိုသည်ကို ကျွန်ုပ်တို့အား အကြောင်းကြားပါ

ဤတောင်းဆိုချက်ကို ဖြေကြားရန်အတွက်သာ အသုံးပြုသည်။

BOLIN 3D

BOLIN 3D · SINCE 2008

စက်မှုအဆင့် 3D ပုံနှိပ်စက်ပစ္စည်းများ သုတေသနနှင့် ထုတ်လုပ်ခြင်း၊ သုံးစွဲပစ္စည်းများနှင့် စိတ်ကြိုက် ပုံနှိပ်ဝန်ဆောင်မှုများကို ပေးပို့ပြီး၊ လေကြောင်းနှင့် အာကာသ၊ ဆေးဘက်ဆိုင်ရာနှင့် သွားဘက်ဆိုင်ရာ၊ မော်တော်ယာဉ်၊ ယဉ်ကျေးမှုနှင့် ဖန်တီးမှု၊ တိကျသော ထုတ်လုပ်မှု ကဏ္ဍများကို လွှမ်းခြုံထားသည်။

စက်ရုံလိပ်စာ

Workshop No. 1, Dingxing Intelligent Emergency Equipment Industrial Park, west side of the road, 260 meters south of the intersection of Qingliangsi Avenue and Zhenxing Road, Liangyuan District, Shangqiu City, Henan Province

တနင်္လာမှ စနေနေ့အထိ 08:30–18:00၊ ၇ ရက် × ၂၄ နာရီ နည်းပညာပံ့ပိုးမှု

ဘာသာစကားနှင့် ဒေသ

© 2026 Henan Bolin 3D Printing Co., Ltd. · မူပိုင်ခွင့်အားလုံး လက်ဝယ်ရှိ

အကြံပြုချက်တောင်းရန်
WhatsAppအကြံပြုချက်တောင်းရန်