PP Polypropylene Pellets အလုံးမှုန့်
အလုံးမှုန့်Pellet · FGF / FDM · Industrial pellet 3D printer

PP Polypropylene Pellets

A light material at 0.90 g/cm³ that resists acids, alkalis and fatigue and absorbs almost no water, suited to chemical containers, corrosion-resistant liners and lightweight large structures.

  • BL10-C supported
  • Density 0.90 g/cm³
  • Elongation >200%
  • Water absorption <0.01%
Extrusion temp.
220–260 ℃
အပူပေးခုံ အပူချိန်
80–100 ℃

ထုတ်ကုန် လက္ခဏာများ

Lighter engineering plastic

At 0.90 g/cm³, large parts shed weight and are easier to move and install.

Acid, alkali and solvent resistant

Stable against acids, alkalis, alcohols and most solvents, fitting chemical and lab settings.

Fatigue resistant and ductile

Elongation above 200% keeps living hinges from cracking under repeated folding.

Almost no water uptake

Water absorption below 0.01% removes long drying steps in storage and production.

အသုံးချမှုများ

  • Chemical tanks & liners
  • Lab & medical
  • Lightweight structures
  • Logistics containers
  • Living hinges
  • Food-contact parts

စက်ရုံ စစ်ဆေးမှု

Uniform pellets, consistent batch MFR and controlled condensation; foil moisture-barrier packing with a BL10-C process card.

ရုပ်ပိုင်းဆိုင်ရာ ဂုဏ်သတ္တိ

Density
0.90 g/cm³ASTM D792
Melting temperature
160–170 ℃DSC
Tensile strength
30–35 MPaASTM D638
Tensile modulus
1200–1500 MPaASTM D638
Flexural modulus
1200–1600 MPaASTM D790
Elongation at break
> 200%ASTM D638
Heat deflection temp.
95–105 ℃ISO 75(0.45MPa)
Water absorption
< 0.01%ASTM D570

အကြံပြု လုပ်ငန်းစဉ် ပါရာမီတာများ

Extrusion temp.
220–260 ℃
အပူပေးခုံ အပူချိန်
80–100 ℃
ပုံနှိပ် အမြန်နှုန်း
20–60 mm/s
နော်ဇယ် အချင်းဝက်
≥1.0 mm

သင့်လျော်သော စက်ပစ္စည်း

BOLIN BL10-C direct pellet extrusion: officially supported; screw extrusion avoids soft PP bending in long feed paths. Use ≥1.0mm nozzles and 0.5–2.0mm layers. Comparable FGF systems need a PP-specific bed surface and 80–100℃ bed.

တန်ဖိုးများသည် ပုံမှန် စမ်းသပ်မှု ရလဒ်များ ဖြစ်ပြီး အမှန်တကယ် စွမ်းဆောင်ရည်မှာ စက်၊ ဖော်စပ်မှု၊ လုပ်ငန်းစဉ်နှင့် ပတ်ဝန်းကျင်အပေါ် မူတည်ပါသည်။

Custom colors available

ဆက်စပ် မော်ဒယ်များ

အလုံးမှုန့် စာရင်း →

နမူနာနှင့် အစုလိုက် ပေးသွင်းမှု မေးမြန်း

အစိတ်အပိုင်း အရွယ်အစား၊ ပစ္စည်းနှင့် ထုတ်လုပ်နိုင်စွမ်းကို အသိပေးပါ။ စက်၊ အလုံးမှုန့်အဆင့်နှင့် ဝက်အူ ပါရာမီတာများကို ကိုက်ညီစေပါမည်။

အကြံပြုချက်တောင်းရန်

မည်သည့်ပုံစံကို ပုံသွင်းလိုသည်ကို ကျွန်ုပ်တို့အား အကြောင်းကြားပါ

ဤတောင်းဆိုချက်ကို ဖြေကြားရန်အတွက်သာ အသုံးပြုသည်။

BOLIN 3D

BOLIN 3D · SINCE 2008

စက်မှုအဆင့် 3D ပုံနှိပ်စက်ပစ္စည်းများ သုတေသနနှင့် ထုတ်လုပ်ခြင်း၊ သုံးစွဲပစ္စည်းများနှင့် စိတ်ကြိုက် ပုံနှိပ်ဝန်ဆောင်မှုများကို ပေးပို့ပြီး၊ လေကြောင်းနှင့် အာကာသ၊ ဆေးဘက်ဆိုင်ရာနှင့် သွားဘက်ဆိုင်ရာ၊ မော်တော်ယာဉ်၊ ယဉ်ကျေးမှုနှင့် ဖန်တီးမှု၊ တိကျသော ထုတ်လုပ်မှု ကဏ္ဍများကို လွှမ်းခြုံထားသည်။

စက်ရုံလိပ်စာ

No. 1 Workshop, Dingxing Intelligent Emergency Equipment Industrial Park, West side of the road, 260 meters south of the intersection of Qingliangsi Avenue and Zhenxing Road, Liangyuan District, Shangqiu City, Henan Province

တနင်္လာမှ စနေနေ့အထိ 08:30–18:00၊ ၇ ရက် × ၂၄ နာရီ နည်းပညာပံ့ပိုးမှု

ဘာသာစကားနှင့် ဒေသ

© 2026 Henan Bolin 3D Printing Co., Ltd. · မူပိုင်ခွင့်အားလုံး လက်ဝယ်ရှိ

အကြံပြုချက်တောင်းရန်
WhatsAppအကြံပြုချက်တောင်းရန်