PC Polycarbonate Pellets အလုံးမှုန့်
အလုံးမှုန့်Pellet · FGF / FDM · Industrial pellet 3D printer

PC Polycarbonate Pellets

An engineering grade with standout impact strength, heat resistance above 130℃ and translucency, for high-temperature duty, load-bearing structures and electrical insulation in large parts.

  • BL10-C supported
  • Tensile 55–70 MPa
  • Heat 130–145 ℃
  • High impact
Extrusion temp.
260–310 ℃
အပူပေးခုံ အပူချိန်
90–110 ℃

ထုတ်ကုန် လက္ခဏာများ

Standout impact strength

Around 34.8 kJ/m² keeps protective structures from brittle failure on impact.

Heat resistant and stable

Heat deflection of 117–145℃ holds structural integrity in hot service.

Translucent and insulating

Natural translucency plus good electrical insulation suits electrical and optical parts.

Drying process included

Ahead of printing, 80℃ for 8h in a convection dryer reduces bubbles and silver streaks.

အသုံးချမှုများ

  • High-temperature parts
  • Electrical & insulation
  • Translucent structures
  • မော်တော်ကားနှင့် သယ်ယူပို့ဆောင်ရေး
  • Load-bearing tooling
  • Large protective guards

စက်ရုံ စစ်ဆေးမှု

Bulk density 0.63–0.66 g/cm³, moisture and MFR checked per batch; drying card plus BL10-C sample verification included.

ရုပ်ပိုင်းဆိုင်ရာ ဂုဏ်သတ္တိ

Density
1.20 g/cm³ASTM D792
Bulk density
0.63–0.66 g/cm³ISO 60
Tensile strength
55–70 MPaASTM D638
Flexural strength
80–108 MPaASTM D790
Flexural modulus
2.0–2.5 GPaASTM D790
Impact strength
≈ 34.8 kJ/m²ISO 179
Heat deflection temp.
117–145 ℃ISO 75(0.45MPa)
Melt flow rate
15–32 g/10minASTM D1238(300℃/1.2kg)

အကြံပြု လုပ်ငန်းစဉ် ပါရာမီတာများ

Extrusion temp.
260–310 ℃
အပူပေးခုံ အပူချိန်
90–110 ℃
Pre-print drying
80 ℃ / 8 h
Environment
Heated chamber

သင့်လျော်သော စက်ပစ္စည်း

BOLIN BL10-C direct pellet extrusion: officially supported; a heated chamber plus 60–120℃ bed handles high-temperature forming. PC absorbs moisture, so dry at 80℃ for 8h first. Comparable FGF systems need nozzles stable to 280–310℃ and a fully enclosed chamber.

တန်ဖိုးများသည် ပုံမှန် စမ်းသပ်မှု ရလဒ်များ ဖြစ်ပြီး အမှန်တကယ် စွမ်းဆောင်ရည်မှာ စက်၊ ဖော်စပ်မှု၊ လုပ်ငန်းစဉ်နှင့် ပတ်ဝန်းကျင်အပေါ် မူတည်ပါသည်။

Custom colors available

ဆက်စပ် မော်ဒယ်များ

အလုံးမှုန့် စာရင်း →

နမူနာနှင့် အစုလိုက် ပေးသွင်းမှု မေးမြန်း

အစိတ်အပိုင်း အရွယ်အစား၊ ပစ္စည်းနှင့် ထုတ်လုပ်နိုင်စွမ်းကို အသိပေးပါ။ စက်၊ အလုံးမှုန့်အဆင့်နှင့် ဝက်အူ ပါရာမီတာများကို ကိုက်ညီစေပါမည်။

အကြံပြုချက်တောင်းရန်

မည်သည့်ပုံစံကို ပုံသွင်းလိုသည်ကို ကျွန်ုပ်တို့အား အကြောင်းကြားပါ

ဤတောင်းဆိုချက်ကို ဖြေကြားရန်အတွက်သာ အသုံးပြုသည်။

BOLIN 3D

BOLIN 3D · SINCE 2008

စက်မှုအဆင့် 3D ပုံနှိပ်စက်ပစ္စည်းများ သုတေသနနှင့် ထုတ်လုပ်ခြင်း၊ သုံးစွဲပစ္စည်းများနှင့် စိတ်ကြိုက် ပုံနှိပ်ဝန်ဆောင်မှုများကို ပေးပို့ပြီး၊ လေကြောင်းနှင့် အာကာသ၊ ဆေးဘက်ဆိုင်ရာနှင့် သွားဘက်ဆိုင်ရာ၊ မော်တော်ယာဉ်၊ ယဉ်ကျေးမှုနှင့် ဖန်တီးမှု၊ တိကျသော ထုတ်လုပ်မှု ကဏ္ဍများကို လွှမ်းခြုံထားသည်။

စက်ရုံလိပ်စာ

Workshop No. 1, Dingxing Intelligent Emergency Equipment Industrial Park, west side of the road, 260 meters south of the intersection of Qingliangsi Avenue and Zhenxing Road, Liangyuan District, Shangqiu City, Henan Province

တနင်္လာမှ စနေနေ့အထိ 08:30–18:00၊ ၇ ရက် × ၂၄ နာရီ နည်းပညာပံ့ပိုးမှု

ဘာသာစကားနှင့် ဒေသ

© 2026 Henan Bolin 3D Printing Co., Ltd. · မူပိုင်ခွင့်အားလုံး လက်ဝယ်ရှိ

အကြံပြုချက်တောင်းရန်
WhatsAppအကြံပြုချက်တောင်းရန်