Application defines the technology; technology defines the equipment model.

Five industries have distinct requirements for build size, surface quality, and production cycle time. Below is a guide to suitable models, materials, and post-processing methods for each scenario to help you align them with your project.

Verification of lightweight structures and complex cooling channels
Aerospace IndustryIllustration

01 · Verification of lightweight structures and complex cooling channels

Aerospace Industry

During the design validation phase, large-format printing enables rapid prototyping of near-final forms, reducing wind tunnel testing and assembly cycles. The SLA800 supports complex internal structures and transparent parts, while the BL10 series is designed for large enclosures and tooling.

  • Monolithic fabrication of complex channels and thin-walled structures
  • Rapid prototyping iteration to verify lightweight structures
  • Replace mechanical machining steps with prototyping
Recommended modelsSLA800BL10-D

Related research

Current State of Arc Additive Manufacturing Technologies for Titanium Alloys in Aviation

Journal of Materials Engineering and Performance, 2022

Read original
Request for this scenario
Dental models, dentures, and surgical guides
Medicine and DentistryIllustration

02 · Dental models, dentures, and surgical guides

Medicine and Dentistry

The HF series uses high-resolution projection printing to create dental models and bases. Batch processing boosts productivity. Planning models enable preoperative alignment and treatment plan approval, reducing time spent on remakes.

  • Mass layout of dental models on a single platform
  • Precise reproduction of fine details
  • Fast delivery of models for preoperative planning
Recommended modelsHF-DL1HF-L3Pro

Related research

Comparison of Accuracy and Precision Across 12 Dental 3D Printers

BDJ Open (Nature portfolio), 2022

Read original
Request for this scenario
Interior and exterior prototypes, bumpers, tooling, and fixtures
Automotive and TransportationIllustration

03 · Interior and exterior prototypes, bumpers, tooling, and fixtures

Automotive and Transportation

The 1000 mm build volume enables printing large parts like bumpers and dashboards in a single cycle, reducing the need for assembly and seam finishing. Engineering materials such as PETG, ABS, and PP are suitable for both visual inspection and fit checks.

  • Large-format printing for bumpers and interior components
  • Parallel assembly verification and visual inspection
  • Quick tool change
Recommended modelsBL10-A / BL10-BBL10-C

Related research

Overview of Arc Additive Manufacturing for Aluminum Alloys in Aerospace and Automotive Industries

Materials Science and Technology, 2022

Read original
Request for this scenario
Large-format layouts, sculptures, and visual merchandising elements
Creative Industries and AdvertisingIllustration

04 · Large-format displays, sculptures, and visual merchandising elements

Creative Industries and Advertising

In advertising and exhibition projects, deadlines are tight and dimensions are large. The BL10 series enables full-part printing in just a few days and supports silk, gradient, and color filaments to achieve the desired surface effects. Parts can be painted and assembled after printing.

  • Seamless printing to minimize visible joints
  • Print with color and gradient materials
  • Coating and Machining
Recommended modelsBL10-A / BL10-BBL10-C

Related research

Digital Twin of Large-Format Additive Manufacturing: ABS Granule Extrusion with Short Carbon Fiber

Proceedings of the Institution of Mechanical Engineers, Part L: 2023

Read original
Request for this scenario
Tooling, low-volume parts, and master models
Precision ManufacturingIllustration

05 · Tooling, low-volume parts, and master models

Precision Manufacturing

For small-batch production of diverse parts, 3D printing eliminates the need for molds. The SLA800 and HF series printers deliver high part accuracy and fitment precision, while the BL10-D model meets requirements for structural strength and tooling durability.

  • Low-volume production without tooling
  • Control of mating surface and part accuracy
  • Rapid iteration of tooling and fixtures
Recommended modelsSLA800BL10-D

Related research

3D Printing on the ISS: Fabricating Plastic and Metal Parts in Microgravity

NASA · ISS Research

Read original
Request for this scenario

Literature and Research

Technology Boundaries: What Open Research Says

The links below to published articles and institutional studies illustrate the applicability boundaries of various technologies and their development directions. Literature conclusions are based on original texts and do not constitute commitments to specific projects.

Large-Format Part Extrusion2023

Digital Twin of Large-Format Additive Manufacturing: ABS Granule Extrusion with Short Carbon Fiber

A wind turbine blade printed via extrusion-based 3D printing using granular ABS with 20% short carbon fibers was used as the test specimen. This study links the material's microstructure, homogenization model, and final part deformation, identifying warpage and residual stress as the primary causes of deformation in large-scale components. Effective control requires joint management through material modeling and process simulation.

Proceedings of the Institution of Mechanical Engineers, Part L: 2023

Related scenarios:Creative Industries and AdvertisingRead original
Dental Photopolymerization2022

Accuracy and Precision Comparison of 12 Dental 3D Printers

Comparative analysis of 12 widely used clinical devices tested on a single block at a uniform layer thickness of 100 μm, with deviations measured by a laboratory scanner. Results reveal consistent accuracy differences across price categories, driven by optical system resolution, build direction, and process parameters.

BDJ Open (Nature portfolio), 2022

Related scenarios:Medicine and DentistryRead original
Metal Arc Additive Manufacturing2022

Overview of Arc Additive Manufacturing Technology for Aluminum Alloys in Aerospace and Automotive Industries

Overview of research on arc additive manufacturing for aluminum alloys in aerospace and automotive components: the process is well-suited for medium-to-large-scale parts, offering improved material utilization and shorter lead times compared to subtractive machining. However, thermal effects induce deformation, porosity, and structural anisotropy, which must be addressed through process parameter optimization and post-processing.

Materials Science and Technology, 2022

Related scenarios:Automotive and TransportationRead original
Metal Arc Additive Manufacturing2022

Current State of Arc Additive Manufacturing Technologies for Titanium Alloys in Aviation

Progress analysis in applying arc additive manufacturing of titanium alloys for airframe components and engine parts, driven primarily by reducing the buy-to-fly ratio. Key engineering challenges—including porosity, delamination, residual stresses, crack propagation, and oxidation—must be resolved before serial production begins.

Journal of Materials Engineering and Performance, 2022

Related scenarios:Aerospace IndustryRead original
Construction 3D Printing2018

Extrusion-based 3D concrete printing: A research roadmap

Discussion of rheological properties, setting characteristics, and molding geometry of fresh cementitious materials within a unified framework; systematic analysis of technological constraints for two application types—element fabrication and on-site wall construction—with the development of a research question matrix for future studies.

Cement and Concrete Research, 2018

Read original
Orbital Manufacturing2014—

3D Printing on the ISS: Fabricating Plastic and Metal Parts in Microgravity

In 2014, the first plastic extrusion 3D printer was launched into orbit and produced over ten tools and parts, including wrenches. Later, experiments with stainless steel printing were conducted. Comparing space-fabricated samples with ground-based control samples revealed that microgravity has no significant effect on the extrusion molding process.

NASA · ISS Research

Related scenarios:Precision ManufacturingRead original

Additional materials:ISO/ASTM 52900:2021Terminology and Classification of Additive TechnologiesOverview of Materials and Methods in Additive Manufacturing (Composite Structures, 2021)

Can't find a use?

Please share the part's intended use, dimensions, and operating conditions so our engineers can determine whether FDM or photopolymer 3D printing is the best fit.

Request a solution

BOLIN 3D

BOLIN 3D · SINCE 2008

Design and manufacturing of industrial 3D printers. Supply of consumables and on-demand printing services for aerospace, medical and dental, automotive, creative industries, and precision engineering.

Factory address

No. 1 Workshop, Dingxing Intelligent Emergency Equipment Industrial Park, intersection of Qinglansi Avenue and Zhengxin Street, Liangyuan District, Shangqu, Henan Province, 260 meters south of the road, west side

Mon–Sat 08:30–18:00, 24/7 technical support 7×24

Language & Region

© 2026 Henan Bolin 3D Printing Co., Ltd. · All rights reserved

Request a solution
WhatsAppRequest a solution