PETG Basic PETG Филамент для 3D-печати
PETGФиламент для 3D-печати

PETG Basic

  • Tough and durable
  • Easy to print
  • Stable dimensions

Совместимые машины:BL10-A / B / D (1.75mm / 3.5mm) and mainstream 1.75mm FDM printers

Nozzle temp.
230–250 ℃
Heating Platform Temperature
70–85 ℃

Преимущества

Strength with toughness

Tensile strength close to ABS with better impact toughness, so loaded parts resist brittle failure.

Low warp, easy to print

Low shrinkage without a sealed chamber keeps large parts dimensionally stable.

Strong layer bonding

Firm interlayer adhesion resists delamination in load-bearing and functional parts.

Water and chemical resistance

Resists dilute acids, alkalis and common solvents, suitable for outdoor and fluid-contact use.

Доступные цвета

  • Lake blue
  • Fruit green
  • Pure white
  • Marble
  • Light grey
  • Skin tone
  • Gold
  • Yellow
  • Red
  • Purple
  • Blue
  • Silver
  • Coffee brown
  • Matte black
  • Black
  • White
  • Matte white
  • Opaque white

18 цветов

Физические свойства

Density
1.27 g/cm³ASTM D792 / ISO 1183
Tensile strength
48–53 MPaASTM D638 / ISO 527
Elongation at break
18–31%ASTM D638
Flexural strength
72 MPaASTM D790
Flexural modulus
2050 MPaASTM D790
Heat deflection temp.
68 ℃ISO 75(0.45MPa)
Vicat softening point
80 ℃ISO 306
Melting temperature
≈ 245 ℃DSC

Рекомендуемые параметры печати

Nozzle temp.
230–250 ℃
Heating Platform Temperature
70–85 ℃
Print speed
40–100 mm/s
Drying
65 ℃ / 4h

Значения этой серии — типичные результаты испытаний; фактические показатели зависят от оборудования, процесса и условий.

PETG Pastel PETG Филамент для 3D-печати
  • Soft pastel palette
  • Smooth surface
  • Creative models

Доступные цвета

7 цветов
Nozzle temp.
230–250 ℃
Heating Platform Temperature
70–85 ℃
MorePETG
PETG Transparent PETG Филамент для 3D-печати
  • Clear colors
  • Glossy finish
  • Creative appearance

Доступные цвета

11 цветов
Nozzle temp.
230–250 ℃
Heating Platform Temperature
70–85 ℃
MorePETG
PETG Light Diffusing PETG Филамент для 3D-печати
  • Even light diffusion
  • Soft glow
  • Ambient scenes

Доступные цвета

10 цветов
Nozzle temp.
230–250 ℃
Heating Platform Temperature
70–85 ℃
MorePETG

Запросить образцы и оптовые поставки

Укажите объём, цвета и принтер — предложим материал, образцы и сроки поставки.

Request a solution

Specify what needs to be manufactured

Used only to respond to requests.

BOLIN 3D

BOLIN 3D · SINCE 2008

Design and manufacturing of industrial 3D printers. Supply of consumables and on-demand printing services for aerospace, medical and dental, automotive, creative industries, and precision engineering.

Factory address

No. 1 Workshop, Dingxing Intelligent Emergency Equipment Industrial Park, intersection of Qinglansi Avenue and Zhengxin Street, Liangyuan District, Shangqu, Henan Province, 260 meters south of the road, west side

Mon–Sat 08:30–18:00, 24/7 technical support 7×24

Language & Region

© 2026 Henan Bolin 3D Printing Co., Ltd. · All rights reserved

Request a solution
WhatsAppRequest a solution