PP Polypropylene Pellets Гранулят
ГранулятPellet · FGF / FDM · Industrial pellet 3D printer

PP Polypropylene Pellets

A light material at 0.90 g/cm³ that resists acids, alkalis and fatigue and absorbs almost no water, suited to chemical containers, corrosion-resistant liners and lightweight large structures.

  • BL10-C supported
  • Density 0.90 g/cm³
  • Elongation >200%
  • Water absorption <0.01%
Extrusion temp.
220–260 ℃
Температура нагревательной платформы
80–100 ℃

Преимущества

Lighter engineering plastic

At 0.90 g/cm³, large parts shed weight and are easier to move and install.

Acid, alkali and solvent resistant

Stable against acids, alkalis, alcohols and most solvents, fitting chemical and lab settings.

Fatigue resistant and ductile

Elongation above 200% keeps living hinges from cracking under repeated folding.

Almost no water uptake

Water absorption below 0.01% removes long drying steps in storage and production.

Применение

  • Chemical tanks & liners
  • Lab & medical
  • Lightweight structures
  • Logistics containers
  • Living hinges
  • Food-contact parts

Заводской контроль

Uniform pellets, consistent batch MFR and controlled condensation; foil moisture-barrier packing with a BL10-C process card.

Физические свойства

Density
0.90 g/cm³ASTM D792
Melting temperature
160–170 ℃DSC
Tensile strength
30–35 MPaASTM D638
Tensile modulus
1200–1500 MPaASTM D638
Flexural modulus
1200–1600 MPaASTM D790
Elongation at break
> 200%ASTM D638
Heat deflection temp.
95–105 ℃ISO 75(0.45MPa)
Water absorption
< 0.01%ASTM D570

Рекомендуемые параметры процесса

Extrusion temp.
220–260 ℃
Температура нагревательной платформы
80–100 ℃
Скорость печати
20–60 mm/s
Диаметр сопла
≥1.0 mm

Совместимое оборудование

BOLIN BL10-C direct pellet extrusion: officially supported; screw extrusion avoids soft PP bending in long feed paths. Use ≥1.0mm nozzles and 0.5–2.0mm layers. Comparable FGF systems need a PP-specific bed surface and 80–100℃ bed.

Значения — типичные результаты испытаний; фактические показатели зависят от оборудования, состава, процесса и условий.

Custom colors available

Похожие модели

Список гранулята →
ABS Engineering Pellets Гранулят

ABS Engineering Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Tough and impact resistant
  • Lower cost on large parts
  • Officially supported by BL10-C
Density
1.04 g/cm³
Tensile strength
35–45 MPa
Flexural strength
60–70 MPa
ПодробнееГранулят
PC Polycarbonate Pellets Гранулят

PC Polycarbonate Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • High impact resistance
  • Heat resistant, dimensionally stable
  • Translucent and insulating
Density
1.20 g/cm³
Bulk density
0.63–0.66 g/cm³
Tensile strength
55–70 MPa
ПодробнееГранулят
PETG Copolyester Pellets Гранулят

PETG Copolyester Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Strong layer bonding
  • Low warpage, easy forming
  • Clear or food-grade options
Density
1.27 g/cm³
Tensile strength
45–55 MPa
Flexural strength
65–75 MPa
ПодробнееГранулят

Запросить образцы и оптовые поставки

Укажите размер детали, материал и объём — подберём машину, марку гранулята и параметры шнека.

Запросить решение

Укажите, что необходимо изготовить

Используется только для ответа на запрос.

BOLIN 3D

BOLIN 3D · SINCE 2008

Design and manufacturing of industrial 3D printers. Supply of consumables and on-demand printing services for aerospace, medical and dental, automotive, creative industries, and precision engineering.

Factory address

No. 1 Workshop, Dingxing Intelligent Emergency Equipment Industrial Park, intersection of Qinglansi Avenue and Zhengxin Street, Liangyuan District, Shangqu, Henan Province, 260 meters south of the road, west side

Mon–Sat 08:30–18:00, 24/7 technical support 7×24

Language & Region

© 2026 Henan Bolin 3D Printing Co., Ltd. · All rights reserved

Request a solution
WhatsAppRequest a solution