ABS Engineering Pellets เม็ดพลาสติก
เม็ดพลาสติกPellet · FGF / FDM · Industrial pellet 3D printer

ABS Engineering Pellets

A classic engineering plastic with toughness, impact strength and steam-polishable surfaces; pellet form skips the filamentizing step for large industrial prototypes, tooling and display structures.

  • BL10-C supported
  • Tensile 35–45 MPa
  • Heat 90–100 ℃
  • Acetone polishable
Extrusion temp.
230–260 ℃
อุณหภูมิแท่นร้อน
90–110 ℃

คุณสมบัติเด่น

Tough and impact resistant

Resists brittle failure under load, suited to jigs handled and assembled frequently.

Easy post-processing

Sanding, drilling and acetone vapor polishing bring large parts to a smooth finish.

Lower cost on large parts

Direct pellet feed removes filamentizing cost, cutting material spend on meter-scale parts.

Heated chamber limits warpage

With the BL10-C heated chamber and a 60–120℃ bed, large parts form more reliably.

การใช้งาน

  • Large tooling
  • ยานยนต์และการขนส่ง
  • Displays & props
  • Casting & composite masters
  • Equipment housings
  • Architecture & models

การตรวจสอบที่โรงงาน

Uniform 2–3mm pellets, bulk density and MFR checked per batch; sample parts printed on BL10-C before shipping.

สมบัติทางกายภาพ

Density
1.04 g/cm³ASTM D792
Tensile strength
35–45 MPaASTM D638
Flexural strength
60–70 MPaASTM D790
Flexural modulus
1.8–2.2 GPaASTM D790
Elongation at break
10–30%ASTM D638
Heat deflection temp.
90–100 ℃ISO 75(0.45MPa)
Pellet size
2–3 mm可选 2–5mm
Water absorption
LowASTM D570

พารามิเตอร์กระบวนการที่แนะนำ

Extrusion temp.
230–260 ℃
อุณหภูมิแท่นร้อน
90–110 ℃
ความเร็วในการพิมพ์
40–150 mm/s
เส้นผ่านศูนย์กลางหัวฉีด
0.8–1.5 mm

อุปกรณ์ที่รองรับ

BOLIN BL10-C direct pellet extrusion: 900×900×900mm build, screw extrusion, about 7–10kg per 24h, 0.8 / 1.2 / 1.5mm nozzles. Comparable FGF / FPF screw systems accept 2–5mm pellets; a heated chamber is recommended to limit warpage.

ค่าเหล่านี้เป็นผลทดสอบโดยทั่วไป ประสิทธิภาพจริงขึ้นอยู่กับเครื่อง สูตร กระบวนการ และสภาพแวดล้อม

Custom colors available

รุ่นที่เกี่ยวข้อง

รายการเม็ดพลาสติก →
PP Polypropylene Pellets เม็ดพลาสติก

PP Polypropylene Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Light with low density
  • Resists acid, alkali and solvents
  • Almost no water absorption
Density
0.90 g/cm³
Melting temperature
160–170 ℃
Tensile strength
30–35 MPa
ดูรายละเอียดเม็ดพลาสติก
PC Polycarbonate Pellets เม็ดพลาสติก

PC Polycarbonate Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • High impact resistance
  • Heat resistant, dimensionally stable
  • Translucent and insulating
Density
1.20 g/cm³
Bulk density
0.63–0.66 g/cm³
Tensile strength
55–70 MPa
ดูรายละเอียดเม็ดพลาสติก

สอบถามตัวอย่างและการจัดส่งจำนวนมาก

แจ้งขนาดชิ้นงาน วัสดุ และกำลังการผลิต เราจะจับคู่เครื่อง เกรดเม็ด และพารามิเตอร์สกรู

ขอคำแนะนำการเลือก

บอกเราว่าต้องการสร้างชิ้นงานอะไร

ใช้เพื่อตอบกลับคำขอนี้เท่านั้น

BOLIN 3D

BOLIN 3D · SINCE 2008

Research and development of industrial-grade 3D printing equipment, providing consumables and custom printing services. Serving the aerospace, medical and dental, automotive, arts and culture, and high-precision manufacturing industries.

Factory Address

West side of the road, 260 meters south of the intersection between Qingliangsi Avenue and Zhenxing Road, Plant No. 1, Dingxing Smart Emergency Equipment Industrial Park, Shangqiu City, Henan Province

Mon–Sat 08:30–18:00, Technical Support 7×24 hours

Language and Region

© 2026 Henan Bolin 3D Printing Co., Ltd. · Copyright

Get selection advice
WhatsAppGet selection advice