PC Polycarbonate Pellets เม็ดพลาสติก
เม็ดพลาสติกPellet · FGF / FDM · Industrial pellet 3D printer

PC Polycarbonate Pellets

An engineering grade with standout impact strength, heat resistance above 130℃ and translucency, for high-temperature duty, load-bearing structures and electrical insulation in large parts.

  • BL10-C supported
  • Tensile 55–70 MPa
  • Heat 130–145 ℃
  • High impact
Extrusion temp.
260–310 ℃
อุณหภูมิแท่นร้อน
90–110 ℃

คุณสมบัติเด่น

Standout impact strength

Around 34.8 kJ/m² keeps protective structures from brittle failure on impact.

Heat resistant and stable

Heat deflection of 117–145℃ holds structural integrity in hot service.

Translucent and insulating

Natural translucency plus good electrical insulation suits electrical and optical parts.

Drying process included

Ahead of printing, 80℃ for 8h in a convection dryer reduces bubbles and silver streaks.

Usage

  • High-temperature parts
  • Electrical & insulation
  • Translucent structures
  • Automotive and Transportation
  • Load-bearing tooling
  • Large protective guards

การตรวจสอบที่โรงงาน

Bulk density 0.63–0.66 g/cm³, moisture and MFR checked per batch; drying card plus BL10-C sample verification included.

สมบัติทางกายภาพ

Density
1.20 g/cm³ASTM D792
Bulk density
0.63–0.66 g/cm³ISO 60
Tensile strength
55–70 MPaASTM D638
Flexural strength
80–108 MPaASTM D790
Flexural modulus
2.0–2.5 GPaASTM D790
Impact strength
≈ 34.8 kJ/m²ISO 179
Heat deflection temp.
117–145 ℃ISO 75(0.45MPa)
Melt flow rate
15–32 g/10minASTM D1238(300℃/1.2kg)

พารามิเตอร์กระบวนการที่แนะนำ

Extrusion temp.
260–310 ℃
อุณหภูมิแท่นร้อน
90–110 ℃
Pre-print drying
80 ℃ / 8 h
Environment
Heated chamber

อุปกรณ์ที่รองรับ

BOLIN BL10-C direct pellet extrusion: officially supported; a heated chamber plus 60–120℃ bed handles high-temperature forming. PC absorbs moisture, so dry at 80℃ for 8h first. Comparable FGF systems need nozzles stable to 280–310℃ and a fully enclosed chamber.

ค่าเหล่านี้เป็นผลทดสอบโดยทั่วไป ประสิทธิภาพจริงขึ้นอยู่กับเครื่อง สูตร กระบวนการ และสภาพแวดล้อม

Custom colors available

ABS Engineering Pellets เม็ดพลาสติก

ABS Engineering Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Tough and impact resistant
  • Lower cost on large parts
  • Officially supported by BL10-C
Density
1.04 g/cm³
Tensile strength
35–45 MPa
Flexural strength
60–70 MPa
View detailsเม็ดพลาสติก
PP Polypropylene Pellets เม็ดพลาสติก

PP Polypropylene Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Light with low density
  • Resists acid, alkali and solvents
  • Almost no water absorption
Density
0.90 g/cm³
Melting temperature
160–170 ℃
Tensile strength
30–35 MPa
View detailsเม็ดพลาสติก
PETG Copolyester Pellets เม็ดพลาสติก

PETG Copolyester Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Strong layer bonding
  • Low warpage, easy forming
  • Clear or food-grade options
Density
1.27 g/cm³
Tensile strength
45–55 MPa
Flexural strength
65–75 MPa
View detailsเม็ดพลาสติก

สอบถามตัวอย่างและการจัดส่งจำนวนมาก

แจ้งขนาดชิ้นงาน วัสดุ และกำลังการผลิต เราจะจับคู่เครื่อง เกรดเม็ด และพารามิเตอร์สกรู

Get selection advice

Tell us what you'd like to create

Use this only to reply to this request.

BOLIN 3D

BOLIN 3D · SINCE 2008

Research and development of industrial-grade 3D printing equipment, providing consumables and custom printing services. Serving the aerospace, medical and dental, automotive, arts and culture, and high-precision manufacturing industries.

Factory Address

West side of the road, 260 meters south of the intersection between Qingliangsi Avenue and Zhenxing Road, Plant No. 1, Dingxing Smart Emergency Equipment Industrial Park, Shangqiu City, Henan Province

Mon–Sat 08:30–18:00, Technical Support 7×24 hours

Language and Region

© 2026 Henan Bolin 3D Printing Co., Ltd. · Copyright

Get selection advice
WhatsAppGet selection advice