PP Polypropylene Pellets เม็ดพลาสติก
เม็ดพลาสติกPellet · FGF / FDM · Industrial pellet 3D printer

PP Polypropylene Pellets

A light material at 0.90 g/cm³ that resists acids, alkalis and fatigue and absorbs almost no water, suited to chemical containers, corrosion-resistant liners and lightweight large structures.

  • BL10-C supported
  • Density 0.90 g/cm³
  • Elongation >200%
  • Water absorption <0.01%
Extrusion temp.
220–260 ℃
อุณหภูมิแท่นร้อน
80–100 ℃

คุณสมบัติเด่น

Lighter engineering plastic

At 0.90 g/cm³, large parts shed weight and are easier to move and install.

Acid, alkali and solvent resistant

Stable against acids, alkalis, alcohols and most solvents, fitting chemical and lab settings.

Fatigue resistant and ductile

Elongation above 200% keeps living hinges from cracking under repeated folding.

Almost no water uptake

Water absorption below 0.01% removes long drying steps in storage and production.

การใช้งาน

  • Chemical tanks & liners
  • Lab & medical
  • Lightweight structures
  • Logistics containers
  • Living hinges
  • Food-contact parts

การตรวจสอบที่โรงงาน

Uniform pellets, consistent batch MFR and controlled condensation; foil moisture-barrier packing with a BL10-C process card.

สมบัติทางกายภาพ

Density
0.90 g/cm³ASTM D792
Melting temperature
160–170 ℃DSC
Tensile strength
30–35 MPaASTM D638
Tensile modulus
1200–1500 MPaASTM D638
Flexural modulus
1200–1600 MPaASTM D790
Elongation at break
> 200%ASTM D638
Heat deflection temp.
95–105 ℃ISO 75(0.45MPa)
Water absorption
< 0.01%ASTM D570

พารามิเตอร์กระบวนการที่แนะนำ

Extrusion temp.
220–260 ℃
อุณหภูมิแท่นร้อน
80–100 ℃
ความเร็วในการพิมพ์
20–60 mm/s
เส้นผ่านศูนย์กลางหัวฉีด
≥1.0 mm

อุปกรณ์ที่รองรับ

BOLIN BL10-C direct pellet extrusion: officially supported; screw extrusion avoids soft PP bending in long feed paths. Use ≥1.0mm nozzles and 0.5–2.0mm layers. Comparable FGF systems need a PP-specific bed surface and 80–100℃ bed.

ค่าเหล่านี้เป็นผลทดสอบโดยทั่วไป ประสิทธิภาพจริงขึ้นอยู่กับเครื่อง สูตร กระบวนการ และสภาพแวดล้อม

Custom colors available

รุ่นที่เกี่ยวข้อง

รายการเม็ดพลาสติก →
ABS Engineering Pellets เม็ดพลาสติก

ABS Engineering Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Tough and impact resistant
  • Lower cost on large parts
  • Officially supported by BL10-C
Density
1.04 g/cm³
Tensile strength
35–45 MPa
Flexural strength
60–70 MPa
ดูรายละเอียดเม็ดพลาสติก
PC Polycarbonate Pellets เม็ดพลาสติก

PC Polycarbonate Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • High impact resistance
  • Heat resistant, dimensionally stable
  • Translucent and insulating
Density
1.20 g/cm³
Bulk density
0.63–0.66 g/cm³
Tensile strength
55–70 MPa
ดูรายละเอียดเม็ดพลาสติก

สอบถามตัวอย่างและการจัดส่งจำนวนมาก

แจ้งขนาดชิ้นงาน วัสดุ และกำลังการผลิต เราจะจับคู่เครื่อง เกรดเม็ด และพารามิเตอร์สกรู

ขอคำแนะนำการเลือก

บอกเราว่าต้องการสร้างชิ้นงานอะไร

ใช้เพื่อตอบกลับคำขอนี้เท่านั้น

BOLIN 3D

BOLIN 3D · SINCE 2008

Research and development of industrial-grade 3D printing equipment, providing consumables and custom printing services. Serving the aerospace, medical and dental, automotive, arts and culture, and high-precision manufacturing industries.

Factory Address

West side of the road, 260 meters south of the intersection between Qingliangsi Avenue and Zhenxing Road, Plant No. 1, Dingxing Smart Emergency Equipment Industrial Park, Shangqiu City, Henan Province

Mon–Sat 08:30–18:00, Technical Support 7×24 hours

Language and Region

© 2026 Henan Bolin 3D Printing Co., Ltd. · Copyright

Get selection advice
WhatsAppGet selection advice