
ABS Engineering Pellets
Pellet · FGF / FDM · Industrial pellet 3D printer
- Tough and impact resistant
- Lower cost on large parts
- Officially supported by BL10-C
- Density
- 1.04 g/cm³
- Tensile strength
- 35–45 MPa
- Flexural strength
- 60–70 MPa

10–40% glass or carbon fiber in ABS, PP, PC or PA bases raises stiffness, strength and dimensional stability for large load-bearing parts and low-warpage molds.
Much higher stiffness
Carbon fiber lifts stiffness 30–60%, keeping large thin walls from sagging.
Low warpage and stable size
Fiber restrains shrinkage, so meter-scale parts hold dimensions with less rework.
Pellet form is more flexible
Compounds go straight into pellet extrusion, avoiding filamentizing issues at high loadings.
Heat and fatigue resistant
Glass fiber raises strength and heat deflection 20–50% for long-term loading.
Kiểm tra tại nhà máy
Fiber content and dispersion, pellet size and MFR checked per batch; base resin and filler ratio can be tailored with sample verification.
Thiết bị tương thích
BOLIN BL10-C direct pellet extrusion: screw extrusion suits filled compounds that would wear out filament feeders. Fiber wears nozzles, so use hardened steel nozzles with a larger diameter.
Các giá trị là kết quả thử nghiệm điển hình; hiệu suất thực tế thay đổi theo thiết bị, công thức, quy trình và môi trường.
Custom color and formulation

Pellet · FGF / FDM · Industrial pellet 3D printer

Pellet · FGF / FDM · Industrial pellet 3D printer

Pellet · FGF / FDM · Industrial pellet 3D printer
Cho biết kích thước chi tiết, vật liệu và sản lượng; chúng tôi sẽ khớp máy, mác hạt và thông số trục vít.