TPU Flexible Pellets အလုံးမှုန့်
အလုံးမှုန့်Pellet · FGF / FDM · Industrial pellet 3D printer

TPU Flexible Pellets

An elastomer in pellet form for large flexible parts — seals, cushions, rollers and soft jaws — printed in one piece without seams.

  • Shore 80A–98A
  • Elongation 300–700%
  • Abrasion resistant
  • One-piece forming
Extrusion temp.
210–235 ℃
အပူပေးခုံ အပူချိန်
40–60 ℃

ထုတ်ကုန် လက္ခဏာများ

High elasticity and rebound

Elongation of 300–700% survives repeated folding and compression without permanent set.

Abrasion and impact resistant

Oil and chemical resistance plus vibration damping suit constant wear and impact.

Large parts in one piece

Meter-scale flexible parts skip joining, keeping seals and structure intact.

Selectable hardness

Shore 80A–98A covers both soft-touch and load-bearing needs.

အသုံးချမှုများ

  • Large seals
  • Cushioning & damping
  • Tires & rollers
  • Soft jaws
  • Sports & protection
  • Industrial bumpers

စက်ရုံ စစ်ဆေးမှု

Hardness rechecked per batch by grade, with pellet size and MFR verification; moisture-barrier packing keeps soft pellets from clumping.

ရုပ်ပိုင်းဆိုင်ရာ ဂုဏ်သတ္တိ

Shore hardness
80A–98AASTM D2240(可选牌号)
Density
1.18–1.22 g/cm³ASTM D792
Tensile strength
15–35 MPaASTM D638
Elongation at break
300–700%ASTM D638
Abrasion resistance
ExcellentTaber 磨耗
Long-term heat
60–80 ℃continuous
Oil resistance
Good耐油脂与多数溶剂
Pellet size
2–3 mm可选 2–5mm

အကြံပြု လုပ်ငန်းစဉ် ပါရာမီတာများ

Extrusion temp.
210–235 ℃
အပူပေးခုံ အပူချိန်
40–60 ℃
ပုံနှိပ် အမြန်နှုန်း
20–40 mm/s
နော်ဇယ် အချင်းဝက်
≥1.0 mm

သင့်လျော်သော စက်ပစ္စည်း

BOLIN BL10-C direct pellet extrusion: the short screw path keeps soft material from buckling in long feeds; run cool and slow, usually without retraction. Comparable FGF systems need short feed paths and hopper drying to avoid clumping.

တန်ဖိုးများသည် ပုံမှန် စမ်းသပ်မှု ရလဒ်များ ဖြစ်ပြီး အမှန်တကယ် စွမ်းဆောင်ရည်မှာ စက်၊ ဖော်စပ်မှု၊ လုပ်ငန်းစဉ်နှင့် ပတ်ဝန်းကျင်အပေါ် မူတည်ပါသည်။

Custom colors available

ဆက်စပ် မော်ဒယ်များ

အလုံးမှုန့် စာရင်း →

နမူနာနှင့် အစုလိုက် ပေးသွင်းမှု မေးမြန်း

အစိတ်အပိုင်း အရွယ်အစား၊ ပစ္စည်းနှင့် ထုတ်လုပ်နိုင်စွမ်းကို အသိပေးပါ။ စက်၊ အလုံးမှုန့်အဆင့်နှင့် ဝက်အူ ပါရာမီတာများကို ကိုက်ညီစေပါမည်။

အကြံပြုချက်တောင်းရန်

မည်သည့်ပုံစံကို ပုံသွင်းလိုသည်ကို ကျွန်ုပ်တို့အား အကြောင်းကြားပါ

ဤတောင်းဆိုချက်ကို ဖြေကြားရန်အတွက်သာ အသုံးပြုသည်။

BOLIN 3D

BOLIN 3D · SINCE 2008

စက်မှုအဆင့် 3D ပုံနှိပ်စက်ပစ္စည်းများ သုတေသနနှင့် ထုတ်လုပ်ခြင်း၊ သုံးစွဲပစ္စည်းများနှင့် စိတ်ကြိုက် ပုံနှိပ်ဝန်ဆောင်မှုများကို ပေးပို့ပြီး၊ လေကြောင်းနှင့် အာကာသ၊ ဆေးဘက်ဆိုင်ရာနှင့် သွားဘက်ဆိုင်ရာ၊ မော်တော်ယာဉ်၊ ယဉ်ကျေးမှုနှင့် ဖန်တီးမှု၊ တိကျသော ထုတ်လုပ်မှု ကဏ္ဍများကို လွှမ်းခြုံထားသည်။

စက်ရုံလိပ်စာ

Workshop No. 1, Dingxing Intelligent Emergency Equipment Industrial Park, west side of the road, 260 meters south of the intersection of Qingliangsi Avenue and Zhenxing Road, Liangyuan District, Shangqiu City, Henan Province

တနင်္လာမှ စနေနေ့အထိ 08:30–18:00၊ ၇ ရက် × ၂၄ နာရီ နည်းပညာပံ့ပိုးမှု

ဘာသာစကားနှင့် ဒေသ

© 2026 Henan Bolin 3D Printing Co., Ltd. · မူပိုင်ခွင့်အားလုံး လက်ဝယ်ရှိ

အကြံပြုချက်တောင်းရန်
WhatsAppအကြံပြုချက်တောင်းရန်