Glass / Carbon Fiber Pellets Гранулят
ГранулятPellet · FGF / FDM · Industrial pellet 3D printer

Glass / Carbon Fiber Pellets

10–40% glass or carbon fiber in ABS, PP, PC or PA bases raises stiffness, strength and dimensional stability for large load-bearing parts and low-warpage molds.

  • Fiber 10–40%
  • Stiffness +30–60%
  • Low warpage
  • Dimensional stability
Extrusion temp.
240–300 ℃
Heating Platform Temperature
90–110 ℃

Преимущества

Much higher stiffness

Carbon fiber lifts stiffness 30–60%, keeping large thin walls from sagging.

Low warpage and stable size

Fiber restrains shrinkage, so meter-scale parts hold dimensions with less rework.

Pellet form is more flexible

Compounds go straight into pellet extrusion, avoiding filamentizing issues at high loadings.

Heat and fatigue resistant

Glass fiber raises strength and heat deflection 20–50% for long-term loading.

Apply

  • Large molds & masters
  • Aerospace Industry
  • Automotive structures
  • Robotics & automation
  • Dimensionally stable parts
  • Recycled material reuse

Заводской контроль

Fiber content and dispersion, pellet size and MFR checked per batch; base resin and filler ratio can be tailored with sample verification.

Физические свойства

Fiber content
10–40 wt%玻纤 / 碳纤可选
Stiffness gain
30–60%对比未增强基体(CF)
Strength gain
20–50%对比未增强基体(GF)
Density
1.15–1.45 g/cm³随基体与填料变化
Warpage
Much lower大件实机验证
Heat deflection temp.
提升 20–50 ℃ISO 75(0.45MPa)
Matrix options
ABS / PP / PC / PA按需定制配方
Pellet size
2–4 mm增强颗粒专用规格

Рекомендуемые параметры процесса

Extrusion temp.
240–300 ℃
Heating Platform Temperature
90–110 ℃
Nozzle diameter
≥1.2 mm(硬化钢)
Environment
Heated chamber

Совместимое оборудование

BOLIN BL10-C direct pellet extrusion: screw extrusion suits filled compounds that would wear out filament feeders. Fiber wears nozzles, so use hardened steel nozzles with a larger diameter.

Значения — типичные результаты испытаний; фактические показатели зависят от оборудования, состава, процесса и условий.

Custom color and formulation

ABS Engineering Pellets Гранулят

ABS Engineering Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Tough and impact resistant
  • Lower cost on large parts
  • Officially supported by BL10-C
Density
1.04 g/cm³
Tensile strength
35–45 MPa
Flexural strength
60–70 MPa
MoreГранулят
PP Polypropylene Pellets Гранулят

PP Polypropylene Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Light with low density
  • Resists acid, alkali and solvents
  • Almost no water absorption
Density
0.90 g/cm³
Melting temperature
160–170 ℃
Tensile strength
30–35 MPa
MoreГранулят
PC Polycarbonate Pellets Гранулят

PC Polycarbonate Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • High impact resistance
  • Heat resistant, dimensionally stable
  • Translucent and insulating
Density
1.20 g/cm³
Bulk density
0.63–0.66 g/cm³
Tensile strength
55–70 MPa
MoreГранулят

Запросить образцы и оптовые поставки

Укажите размер детали, материал и объём — подберём машину, марку гранулята и параметры шнека.

Request a solution

Specify what needs to be manufactured

Used only to respond to requests.

BOLIN 3D

BOLIN 3D · SINCE 2008

Design and manufacturing of industrial 3D printers. Supply of consumables and on-demand printing services for aerospace, medical and dental, automotive, creative industries, and precision engineering.

Factory address

No. 1 Workshop, Dingxing Intelligent Emergency Equipment Industrial Park, intersection of Qinglansi Avenue and Zhengxin Street, Liangyuan District, Shangqu, Henan Province, 260 meters south of the road, west side

Mon–Sat 08:30–18:00, 24/7 technical support 7×24

Language & Region

© 2026 Henan Bolin 3D Printing Co., Ltd. · All rights reserved

Request a solution
WhatsAppRequest a solution