TPU Flexible Pellets เม็ดพลาสติก
เม็ดพลาสติกPellet · FGF / FDM · Industrial pellet 3D printer

TPU Flexible Pellets

An elastomer in pellet form for large flexible parts — seals, cushions, rollers and soft jaws — printed in one piece without seams.

  • Shore 80A–98A
  • Elongation 300–700%
  • Abrasion resistant
  • One-piece forming
Extrusion temp.
210–235 ℃
อุณหภูมิแท่นร้อน
40–60 ℃

คุณสมบัติเด่น

High elasticity and rebound

Elongation of 300–700% survives repeated folding and compression without permanent set.

Abrasion and impact resistant

Oil and chemical resistance plus vibration damping suit constant wear and impact.

Large parts in one piece

Meter-scale flexible parts skip joining, keeping seals and structure intact.

Selectable hardness

Shore 80A–98A covers both soft-touch and load-bearing needs.

การใช้งาน

  • Large seals
  • Cushioning & damping
  • Tires & rollers
  • Soft jaws
  • Sports & protection
  • Industrial bumpers

การตรวจสอบที่โรงงาน

Hardness rechecked per batch by grade, with pellet size and MFR verification; moisture-barrier packing keeps soft pellets from clumping.

สมบัติทางกายภาพ

Shore hardness
80A–98AASTM D2240(可选牌号)
Density
1.18–1.22 g/cm³ASTM D792
Tensile strength
15–35 MPaASTM D638
Elongation at break
300–700%ASTM D638
Abrasion resistance
ExcellentTaber 磨耗
Long-term heat
60–80 ℃continuous
Oil resistance
Good耐油脂与多数溶剂
Pellet size
2–3 mm可选 2–5mm

พารามิเตอร์กระบวนการที่แนะนำ

Extrusion temp.
210–235 ℃
อุณหภูมิแท่นร้อน
40–60 ℃
ความเร็วในการพิมพ์
20–40 mm/s
เส้นผ่านศูนย์กลางหัวฉีด
≥1.0 mm

อุปกรณ์ที่รองรับ

BOLIN BL10-C direct pellet extrusion: the short screw path keeps soft material from buckling in long feeds; run cool and slow, usually without retraction. Comparable FGF systems need short feed paths and hopper drying to avoid clumping.

ค่าเหล่านี้เป็นผลทดสอบโดยทั่วไป ประสิทธิภาพจริงขึ้นอยู่กับเครื่อง สูตร กระบวนการ และสภาพแวดล้อม

Custom colors available

รุ่นที่เกี่ยวข้อง

รายการเม็ดพลาสติก →
ABS Engineering Pellets เม็ดพลาสติก

ABS Engineering Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Tough and impact resistant
  • Lower cost on large parts
  • Officially supported by BL10-C
Density
1.04 g/cm³
Tensile strength
35–45 MPa
Flexural strength
60–70 MPa
ดูรายละเอียดเม็ดพลาสติก
PP Polypropylene Pellets เม็ดพลาสติก

PP Polypropylene Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • Light with low density
  • Resists acid, alkali and solvents
  • Almost no water absorption
Density
0.90 g/cm³
Melting temperature
160–170 ℃
Tensile strength
30–35 MPa
ดูรายละเอียดเม็ดพลาสติก
PC Polycarbonate Pellets เม็ดพลาสติก

PC Polycarbonate Pellets

Pellet · FGF / FDM · Industrial pellet 3D printer

  • High impact resistance
  • Heat resistant, dimensionally stable
  • Translucent and insulating
Density
1.20 g/cm³
Bulk density
0.63–0.66 g/cm³
Tensile strength
55–70 MPa
ดูรายละเอียดเม็ดพลาสติก

สอบถามตัวอย่างและการจัดส่งจำนวนมาก

แจ้งขนาดชิ้นงาน วัสดุ และกำลังการผลิต เราจะจับคู่เครื่อง เกรดเม็ด และพารามิเตอร์สกรู

ขอคำแนะนำการเลือก

บอกเราว่าต้องการสร้างชิ้นงานอะไร

ใช้เพื่อตอบกลับคำขอนี้เท่านั้น

BOLIN 3D

BOLIN 3D · SINCE 2008

Research and development of industrial-grade 3D printing equipment, providing consumables and custom printing services. Serving the aerospace, medical and dental, automotive, arts and culture, and high-precision manufacturing industries.

Factory Address

West side of the road, 260 meters south of the intersection between Qingliangsi Avenue and Zhenxing Road, Plant No. 1, Dingxing Smart Emergency Equipment Industrial Park, Shangqiu City, Henan Province

Mon–Sat 08:30–18:00, Technical Support 7×24 hours

Language and Region

© 2026 Henan Bolin 3D Printing Co., Ltd. · Copyright

Get selection advice
WhatsAppGet selection advice